| Products > Test Equipment |
| Rigol ds1074z "auto disabled" |
| << < (4/6) > >> |
| Eray:
----- SOLUTION for the Auto LOCK! ----- No need to install that useless 500MB software (which sometimes work by chance) for cancelling Auto Lock. Go to Storage-> DiskManage -> FlashErase and Confirm by clicking OK, then reset your Scope. Auto Lock has gone! ;) To amateur Rigol engineers: this function must be added with a pin code, which will be saved to a user non-accessible flash :) |
| tooki:
Nope, that definitely doesn't work. Have to use the command. |
| aveekbh:
You don't need Ultrasigma. Just connect the scope to Ethernet, telnet to the scope on TCP port 5025 and enter: --- Code: --- :SYSTem:AUToscale ON --- End code --- The command is case insensitive and the lower case letters are optional. |
| Gabri74:
--- Quote from: Sebastian on June 17, 2014, 01:56:52 pm ---Indeed, it would be better if you couldn't lock it directly on the scope but it is definitely not a bug, because it is noted in the manual that it works that way. --- End quote --- I agree. Moreover, when you lock the Auto button from the menu a very clear warning message is given (something like 'this cannot be undone', don't remember exactly right now) and confirmation before proceeding is requested. So definitely not a bug :) (or maybe a PBCAK bug ;) ) |
| fichamba:
--- Quote from: aveekbh on May 13, 2015, 03:52:44 pm ---You don't need Ultrasigma. Just connect the scope to Ethernet, telnet to the scope on TCP port 5025 and enter: --- Code: --- :SYSTem:AUToscale ON --- End code --- The command is case insensitive and the lower case letters are optional. --- End quote --- Sorry…there is only one space between autoscale: on or there are no spaces?. These are my results: Thank you. |
| Navigation |
| Message Index |
| Next page |
| Previous page |