Products > Test Equipment

Rigol ds1074z "auto disabled"

<< < (4/6) > >>

Eray:
----- SOLUTION for the Auto LOCK! -----

No need to install that useless 500MB software (which sometimes work by chance) for cancelling Auto Lock.

Go to Storage-> DiskManage -> FlashErase and Confirm by clicking OK, then reset your Scope. Auto Lock has gone! ;)

To amateur Rigol engineers: this function must be added with a pin code, which will be saved to a user non-accessible flash :)

tooki:
Nope, that definitely doesn't work. Have to use the command.

aveekbh:
You don't need Ultrasigma. Just connect the scope to Ethernet, telnet to the scope on TCP port 5025 and enter:

--- Code: --- :SYSTem:AUToscale ON

--- End code ---
The command is case insensitive and the lower case letters are optional.

Gabri74:

--- Quote from: Sebastian on June 17, 2014, 01:56:52 pm ---Indeed, it would be better if you couldn't lock it directly on the scope but it is definitely not a bug, because it is noted in the manual that it works that way.

--- End quote ---

I agree. Moreover, when you lock the Auto button from the menu a very clear warning message is given (something like 'this cannot be undone', don't remember exactly right now) and confirmation before proceeding is requested.
So definitely not a bug  :)
(or maybe a PBCAK bug  ;)  )

fichamba:

--- Quote from: aveekbh on May 13, 2015, 03:52:44 pm ---You don't need Ultrasigma. Just connect the scope to Ethernet, telnet to the scope on TCP port 5025 and enter:

--- Code: --- :SYSTem:AUToscale ON

--- End code ---
The command is case insensitive and the lower case letters are optional.

--- End quote ---

Sorry…there is only one space between autoscale: on or there are no spaces?.
These are my results:



Thank you.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod