| Products > Test Equipment |
| Rigol DSXXXX .GEL firmware file format |
| << < (36/38) > >> |
| pitfermi:
hi. i want to change my boot screen logo from the stock, to an image like Dave's youtube channel picture. he modded his ds1054z with that picture and i want to do that same thing. what are the steps? |
| SERJSOCHI:
--- Quote from: pitfermi on September 04, 2020, 04:23:23 pm ---hi. i want to change my boot screen logo from the stock, to an image like Dave's youtube channel picture. he modded his ds1054z with that picture and i want to do that same thing. what are the steps? --- End quote --- Hi. 1. Download Latest RigolPacker. 2. Download Lastest firmware file (for example 00.04.04.04.03). 3. RigolPacker > Open Firmware file. 4. Double click at /sys/logo.hex (/sys/SparrowConfig.hex for MSO version) then click "Show content". 5. Click "Save to file", edit saved picture (I using Paint.Net), click "Change image" and load changed file. 6. Close All windows in reverse order, in main RigolPacker window click "Save firmware file". 7. Copy saved firmware file to USB Flash and update your ds1054z. if, as a result of a firmware update, the sparrow in your ds1054z is dead, copy original firmware to USB Flash and spam "Help" button while ds1054z booting after power on. CH1 must start blinking. |
| pitfermi:
thanks. worked. --- Quote from: SERJSOCHI on September 05, 2020, 04:32:46 pm --- --- Quote from: pitfermi on September 04, 2020, 04:23:23 pm ---hi. i want to change my boot screen logo from the stock, to an image like Dave's youtube channel picture. he modded his ds1054z with that picture and i want to do that same thing. what are the steps? --- End quote --- Hi. 1. Download Latest RigolPacker. 2. Download Lastest firmware file (for example 00.04.04.04.03). 3. RigolPacker > Open Firmware file. 4. Double click at /sys/logo.hex (/sys/SparrowConfig.hex for MSO version) then click "Show content". 5. Click "Save to file", edit saved picture (I using Paint.Net), click "Change image" and load changed file. 6. Close All windows in reverse order, in main RigolPacker window click "Save firmware file". 7. Copy saved firmware file to USB Flash and update your ds1054z. if, as a result of a firmware update, the sparrow in your ds1054z is dead, copy original firmware to USB Flash and spam "Help" button while ds1054z booting after power on. CH1 must start blinking. --- End quote --- |
| alexalr:
Please help with the restoration of Rigol DS1054Z. In the oscillograph there was firmware 00.04.04.04.03, mixed up the update file, instead of DS1000Z downloaded DS1000Z-E versions of 00.06.02.00 01 from here https://www.rigolna.com/firmware/. The set received an update, rebooted and as a result works, but there are no two channels, channels 1 and 2 work. Channels 3 and 4 are not enabled. As I realized - poured firmware for DS1202Z-E. Tried to upgrade with the 00.04.04.04.03 version, but the set does not see the update... Help restore the DS1054Z, please. Modify message |
| tv84:
https://www.eevblog.com/forum/testgear/new-rigol-ds1054z-oscilloscope/msg3097533/#msg3097533 Move from this thread as it is out of topic. You have 2 solutions: ask Rigol for a FW that solves (their error) or change the FW yourself. There is enough information in this forum on how to change the version number (of the FW package) to allow flashing over a newer one. |
| Navigation |
| Message Index |
| Next page |
| Previous page |