Products > Test Equipment

Rigol HDO1000 and HDO4000 12bit oscilloscopes launched in China

<< < (216/258) > >>

Antonio90:

--- Quote from: Jacon on December 11, 2023, 01:47:15 pm ---
--- Quote from: Antonio90 on December 10, 2023, 07:34:02 pm ---...Could someone extract some kind of waveform from his scope and post it?...
--- End quote ---

Done already for FFT from DHO800 here:
https://www.eevblog.com/forum/testgear/rigol-dho804-test-and-compare-thread/msg5214702/#msg5214702 :-+

--- End quote ---

Thanks! But I also wanted to know if there is an easy way of extracting .CSV or other widely supported format via SCPI to process on Matlab and also get an example waveform extracted from the scope (if anyone has an HDO model and is able to post one), to muck around with it in the laptop. I'm mostly away from my home lab, and will be for some time, but have the laptop with me.

RobbiOne:

--- Quote from: ebastler on December 07, 2023, 04:55:10 pm ---
--- Quote from: RobbiOne on December 07, 2023, 04:48:21 pm ---Inside that web page:

https://int.rigol.com/products/detail/DHO1000

I just see a tech features of the scope and 3 links for manual, datasheet and demo request.
No firmware or download link.

--- End quote ---

Pro tip: Try the "Software & Firmware" section. Scroll down until you get to the light-grey background, then there's a menu bar(tab selector).

--- End quote ---

I don't find any firmware version for DHO scopes in the firmware download page of https://int.rigol.com/ web site. Just FW for DS, MS, DG, DM, RS, DL, DP scopes.

Post a valid link for the DHO FW 2.12 if it really exists.

ebastler:

--- Quote from: RobbiOne on December 11, 2023, 09:29:39 pm ---Post a valid link for the DHO FW 2.12 if it really exists.

--- End quote ---

For the third time: The link is https://int.rigol.com/products/detail/DHO1000.
Scroll down a bit, and check the attached screenshot to get your bearings.

Are you sure you are up to installing it?  ::)

Martin72:
What makes me a bit suspicious is that, at least in Europe, the promo for the DHO1000 will continue until the end of the year.
Not that there isn't an "MK2" version in the offing and they want to get the stocks of the "old" version out of the warehouses.
40% less is really a scoop, and then for so long...

ebastler:
Well, we know that they have a "value engineered" variant ready with slightly lowered specs (memory, sampling rate), the -U series. Maybe some design changes to get rid of those hard-to-source parts in the original DHO1000 and 4000 as well. My guess is that the discounted price point is there to stay, and Rigol will just sell the more cost-effective DHO1000-U once the old inventory is gone.

EDIT: Just looked it up again, and apparently there are only 200 MHz versions of the -U variant. So maybe the 70 and 100 MHz DHO1000 are going to disappear, because -- at the reduced price -- they are too close to the DHO800?

A DHO1204-U priced a tad above the 924S would make some sense. But then Rigol really need to add LA and AWG-enabled DHOs with the large screen!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod