| Products > Test Equipment |
| Rigol HDO1000 and HDO4000 12bit oscilloscopes launched in China |
| << < (217/258) > >> |
| Veteran68:
If they were trying to unload the DHO1000 line with a permanent price cut, why would they go back to regular MSRP pricing in NA already? The promo ended here on 12/4 I believe. |
| RobbiOne:
--- Quote from: ebastler on December 11, 2023, 09:48:00 pm --- --- Quote from: RobbiOne on December 11, 2023, 09:29:39 pm ---Post a valid link for the DHO FW 2.12 if it really exists. --- End quote --- For the third time: The link is https://int.rigol.com/products/detail/DHO1000. Scroll down a bit, and check the attached screenshot to get your bearings. Are you sure you are up to installing it? ::) --- End quote --- Solved! The international Rigol site is not an good example of professional web site. I looking for DHO FW in the support -> download page related to FW downloads for all Rigol devices and filtered just for scopes only: https://supportint.rigol.com/SUPPORTS/software-firmware-download.html and in that page doesn't exixt any FW for DHO series but just for all other series (why Rigol?). The DHO FW links exist only in the DHO scope specific page (that's stupid and not intuitive at all) inside the Features section (?) of a specific scope model. Thank you indeed Eblaster for your support. Rigol EU shows as last FW version the v2.11 dated August 2023 but the v2.12 contains files dated October and so it seems the true last version with these modifications: 00.02.12 2023/10/18 - Added DHO1202U and DHO1204U models - Fixed the problem of CAN decoding result misalignment when there is an error frame - Fixed the problem of wrong value in measurement when switching frequency meter source - Optimize customer experience of frequency meter statistics function - Fixed the issue where the median boundary value measurement results and cursor indication are incorrect when the display type is percentage. |
| MPX:
00.02.12 2023/10/18 - Fixed the problem of CAN decoding result misalignment when there is an error frame - Fixed the problem of wrong value in measurement when switching frequency meter source - Optimize customer experience of frequency meter statistics function - Fixed the issue where the median boundary value measurement results and cursor indication are incorrect when the display type is percentage. |
| Veteran68:
And Rigol includes the changelog inside the downloaded archive |
| core:
--- Quote from: ebastler on December 11, 2023, 10:45:15 pm ---Well, we know that they have a "value engineered" variant ready with slightly lowered specs (memory, sampling rate), the -U series. Maybe some design changes to get rid of those hard-to-source parts in the original DHO1000 and 4000 as well. My guess is that the discounted price point is there to stay, and Rigol will just sell the more cost-effective DHO1000-U once the old inventory is gone. EDIT: Just looked it up again, and apparently there are only 200 MHz versions of the -U variant. So maybe the 70 and 100 MHz DHO1000 are going to disappear, because -- at the reduced price -- they are too close to the DHO800? A DHO1204-U priced a tad above the 924S would make some sense. But then Rigol really need to add LA and AWG-enabled DHOs with the large screen! --- End quote --- That's a very plausible explanation. DHO1000 it's just a very good basic oscilloscope with high resolution and very low input stage noise. Also, the big high resolution screen it's very good. It have a lot of power processing, it's fast even with 4 math active windows, but that's all we got. If the FFT will be optimised and improved (Max-Hold and Average), and adding the Dots mode and X Interpolation, will be enough for me. For the promotional price still active in EU it's a very good deal. For the normal price not so much. |
| Navigation |
| Message Index |
| Next page |
| Previous page |