| Products > Test Equipment |
| Rigol MSO 5000 hardware/software revisions |
| << < (51/84) > >> |
| NoisyBoy:
02.00.03 is the latest, see the EU or int firmware download site. If you have a signal only on Ch 1, and all the others open, and press Auto, does your channel 3 also come on with just noise? |
| Gandalf_Sr:
I got my budget LA probe system working, only tested channels 0-7 up to 10 MHz so far. Check out my thread for details (updated pics are in the second post). |
| NoisyBoy:
Nice! Love to see more update as you move along in your project. Perhaps that would allow more people to use the LA feature in the scope, as I don’t recall seeing many posts from actual Rigol LA owners. |
| sb42:
--- Quote from: NoisyBoy on March 13, 2020, 05:34:30 pm ---02.00.03 is the latest, see the EU or int firmware download site. If you have a signal only on Ch 1, and all the others open, and press Auto, does your channel 3 also come on with just noise? --- End quote --- Yes if there's an open probe connected to CH3. No if the probe is disconnected or shorted, or if the retractable hook tip is detached. So YMMV I think. This is on 00.01.02.00.02; not entirely convinced that 01.01.01.04.08 was different. Edit: forgot to mention - MSO5074, hw rev 01.01.000. |
| Cerebus:
--- Quote from: sb42 on March 14, 2020, 08:28:10 pm --- --- Quote from: NoisyBoy on March 13, 2020, 05:34:30 pm ---02.00.03 is the latest, see the EU or int firmware download site. If you have a signal only on Ch 1, and all the others open, and press Auto, does your channel 3 also come on with just noise? --- End quote --- Yes if there's an open probe connected to CH3. No if the probe is disconnected or shorted, or if the retractable hook tip is detached. So YMMV I think. This is on 00.01.02.00.02; not entirely convinced that 01.01.01.04.08 was different. --- End quote --- Just tried this on mine - 01.01.01.04.08. Attach probes to 1 & 3. 1 connected to cal out, 3 floating, all channels off. Hit Auto, chans 1 & 3 come on. Same setup, probe 3 floating but hook tip removed (i.e. all but the last ~3mm of tip shielded) only chan 1 comes on. So yeah, not a new bug in 00.01.02.00.02, but just the auto setup being very sensitive to the presence of even a small signal on a channel. Repeated the same experiment with chans 1 & 2 - exactly the same result. |
| Navigation |
| Message Index |
| Next page |
| Previous page |