Products > Test Equipment

Rigol MSO 5000 hardware/software revisions

<< < (67/84) > >>

pmaggi:
A bit more testing with bode plot.
I tryed an active 3rd order chebyshev filter. As you can see in the picture below, the gain looks as it should be, but the phase is ok until it reaches -180º, then it begins to increase instead of continuing descending . It seems that the algorithm just measures the instantaneous phase and doesn't consider the previous trend.
Anyway, this new functionality seems to be very useful.

tautech:
Exercise for you guys with the new Bode plot...this done a couple of years back with the first Bode plot version in SDS1104X-E:


--- Quote from: tautech on February 25, 2018, 05:28:44 am ---Simple Bode plot exercise/example.

1 KHz to 30 KHz passive band pass filter.
Components breadboarded from parts on hand.
Based entirely on the circuit example from here:
https://www.electronics-tutorials.ws/filter/filter_4.html





Should give us something like this:




SDS1104X-E
Sweep source SAG1021 optional AWG module
Connection HW; BNC cable and Tee, 2x BNC to croc clip leads (DUT IN, DUT OUT)

Sweep = 100 Hz - 100 KHz, 4V p-p, Low res



--- End quote ---

pmaggi:
I tryed your excercise... different capacitors...
1,6 kHz - 23.4 kHz
Here it is the result...

Martin72:
Wo-hooo, bode plot will come in may, they´ve once told to me - And now, it´s april, so early, wow...
Sorry, must correct this.
Will come in may is correct, but in may 2019.... :-X
SCNR

tautech:

--- Quote from: pmaggi on April 18, 2020, 10:21:50 pm ---I tryed your excercise... different capacitors...
1,6 kHz - 23.4 kHz
Here it is the result...

(Attachment Link)

--- End quote ---
Not bad at all.  :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod