| Products > Test Equipment |
| Rigol MSO 5000 hardware/software revisions |
| << < (69/84) > >> |
| Martin72:
--- Quote from: Sighound36 on April 19, 2020, 07:42:36 am ---Martin Perhaps you could work some magic on LeCroy for a bode plot function as well :-DD --- End quote --- I could and I would… But as I know the support in germany well, I could say their forthcoming answer instantly now and here. ;) |
| NoisyBoy:
For those of you who have upgraded to the new firmware, new documentations are available: * Manual * Quick start * Programming Guide * Data Sheet You can access them via https://www.rigolna.com/products/digital-oscilloscopes/mso5000/ You can look up how the FRA (Bode Plot) function work. I was hoping to figure out how to let it use an external AWG, unfortunately, looks like the option is disabled and only the internal AWG is supported - for now. |
| thm_w:
--- Quote from: NoisyBoy on May 12, 2020, 11:12:46 pm ---You can look up how the FRA (Bode Plot) function work. I was hoping to figure out how to let it use an external AWG, unfortunately, looks like the option is disabled and only the internal AWG is supported - for now. --- End quote --- If you want customization outside of the basic functionality they provide, better off writing your own SCPI scripts to control both instruments. edit: the new bode scpi commands --- Code: ---Command List ◆ BODeplot ENABle ◆ BODeplot DISPtype ◆ BODeplot SOURce ◆ BODeplot SWE eptype ◆ BODeplot REFin ◆ BODeplot REFout ◆ BODeplot IMPedance ◆ BODeplot STARt ◆ BODeplot STOP ◆ BODeplot POINT ◆ BODeplot VOLTage ◆ BODeplot VOLTage PROFile ◆ BODeplot GMARgin ◆ BODeplot GMARgin FREQuency ◆ BODeplot PMARgin ◆ BODeplot PMARgin FREQuenc y --- End code --- - HRESolution was added to :ACQuire:TYPE, but there is no mention of configurability. So nothing has changed there.. - :CHANnel<n>:POSition command was added. - :cursor:measure:indicator command added - :search:count and :value added - :trace command added (AWG) - lower probe ratios added Tons of small changes in the documentation. |
| jemangedeslolos:
Has anyone ever tried using a wireless mouse and keyboard set ? I tried Microsoft and Chinese brand (Teknet) but nothing works. Thank you :) |
| Gandalf_Sr:
--- Quote from: jemangedeslolos on June 03, 2020, 12:39:25 pm ---Has anyone ever tried using a wireless mouse and keyboard set ? I tried Microsoft and Chinese brand (Teknet) but nothing works. Thank you :) --- End quote --- I use a Logitech M185 which works well; the tiny USB dongle thing has to be plugged into the front USB port of the MS05000, I tried a B-A adapter and plugged it into the back port but it didn't work. I also found that the dongle needs to be plugged in before the scope is powered up (I think). What's annoying is that, in order to use the front USB port for capturing screen shots to a USB-A thumb drive, you have to unplug the mouse adapter and you can't just hot-replug the adapter, the scope has to be power cycled to get it to work again. |
| Navigation |
| Message Index |
| Next page |
| Previous page |