Products > Test Equipment
Rigol MSO 5000 hardware/software revisions
<< < (70/84) > >>
pmaggi:
I did it and it worked flawless.
You have to connect the receiver dongle before powering up the osciloscope in order to be recognized.

I tryed with a Logitech MK270 (just the mouse)
skander36:

--- Quote from: pmaggi on June 03, 2020, 02:49:51 pm ---
You have to connect the receiver dongle before powering up the osciloscope in order to be recognized.


--- End quote ---

Seem that in the last fw. version 03, plug & play has been solved.
Also in Bode plot you can move the cursor by scroll wheel.
jemangedeslolos:
Thank you guys, I only did a quick test and I didn't think about rebouting the device.
I will buy a compact keyboard with a mouse and test by myself  :)
Gandalf_Sr:

--- Quote from: jemangedeslolos on June 03, 2020, 07:11:32 pm ---Thank you guys, I only did a quick test and I didn't think about rebouting the device.
I will buy a compact keyboard with a mouse and test by myself  :)

--- End quote ---
You can buy a Logitech M185 mouse for about $20 but be aware that it's a bit smaller than a 'normal' mouse.
jemangedeslolos:

--- Quote from: Gandalf_Sr on June 04, 2020, 09:13:36 am ---
--- Quote from: jemangedeslolos on June 03, 2020, 07:11:32 pm ---Thank you guys, I only did a quick test and I didn't think about rebouting the device.
I will buy a compact keyboard with a mouse and test by myself  :)

--- End quote ---
You can buy a Logitech M185 mouse for about $20 but be aware that it's a bit smaller than a 'normal' mouse.

--- End quote ---

I already have some spare mouses, I will test with what I have but with the scope powered off this time.
What i wanted is a keyboard and mouse set to occupy only one usb port.
I also have a Logitech set with their "Unifying" dongle. If it works with that, I could choose any model  :)

Thank you again  :-+
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod