Products > Test Equipment

Rigol MSO 5000 hardware/software revisions

<< < (75/84) > >>

Gandalf_Sr:
I have a Logitech M185 mouse that works well but only on the front Type A USB port; has anyone made a mouse work from the rear Type B port?  I bought a B to A USB adapter and it didn't work with the Logitech dongle.

aristarchus:

--- Quote from: Gandalf_Sr on June 18, 2020, 09:40:57 am ---I have a Logitech M185 mouse that works well but only on the front Type A USB port; has anyone made a mouse work from the rear Type B port?  I bought a B to A USB adapter and it didn't work with the Logitech dongle.

--- End quote ---


Isnt the rear one a "USB DEVICE Interface" ?
I guess it is not host, so it is used only to connect the oscope to your PC as a device.

luma:
That's correct - front USB A port is a USB host, meaning it can have devices plugged into it and control them as normal.  Rear USB B is USB device, meaning it can be plugged into a host for remote control of the scope.  If you need more USB A ports to connect additinal devices, use a hub connected to the front port.

Gandalf_Sr:

--- Quote from: aristarchus on June 18, 2020, 10:16:15 am ---Isn't the rear one a "USB DEVICE Interface" ?
I guess it is not host, so it is used only to connect the oscope to your PC as a device.

--- End quote ---
I think you're right, not being a USB expert, the idea that it is only a 'device' totally escaped my feeble mind.  Anyway, the slight irritation is that, if the front USB port is used for a mouse dongle, then there's no USB port available to run a USB drive to save screen captures to - unless you run a hub.

Gandalf_Sr:
So, a hub seems like a good purchase.  Can anyone confirm what works with the MSO5000?  I think it's USB 2.0 and wondered if this one from Amazon would do?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod