| Products > Test Equipment |
| Rigol MSO 5000 hardware/software revisions |
| << < (84/84) |
| NoisyBoy:
I would suggest not wasting any more time with it as it appears to me the scope is defective. Just pack it up and wait for the shipper to pick it up, let’s hope they can replace it for you quickly. BTW, the MSO5000 does not have good shielding on the front end, I pick up a lot of noise if it is close to the satellites on my mesh network with nothing attached. But I doubt any noise can overpower the compensation signal in your case. |
| Protegimus:
v00.01.03.02.02 2023/01/04 Successful firmware update with default setting on boot (reverted from Utility > System > Power On > Last for the purpose of the update). Observations: 1. 500uV range is no longer available on CH1 - confirmed - MAJOR - can we have this back please Rigol? (listed under page 18, Overview of the MSO5000 Series Technical Specifications > Vertical System Analog Channel > Vertical Sensitivity Range) 2. Selecting 1mV range automatically engages 20MHz bandwidth limit, with B indicated in the channel status label - Rigol, please provide the technical background on why this is necessary 3. Function Navigation (on-screen icon) menu is also extended/rearranged (thanks @skander36) 4. Default Storage > Save Wave > File Name is RigolDS0 - minor - perhaps should reflect the correct model by default, although it can be customised 5. VNC control is awesome 6. Rigol logo changed from Rigol (yellow) to Rigol (blue) :palm: |
| w.v.s.:
--- Quote from: noreply on June 17, 2020, 11:20:41 am --- OK ... - I can offically confirm that K&M does indeed work :clap: - if USB hub is plugged-in and system is rebooted :popcorn: --- End quote --- Helllo, is it really a matter of the hub? When I just connect the keyboard and reboot, It still closes every window, into which i try to enter some data. So signals are received but do not seem to be interpreted correctly. Update: This is also the case, when I boot with a keyboard connected via a hub. However, a mouse works even it is connected to the hub after booting. I've tested with the 0.01.03.02.02 firmware. |
| Protegimus:
Does anyone have any high resolution photo's of the MSO5000 power supply, ideally showing capacitor type & values? I checked Dave's teardown video and photo archive https://www.flickr.com/photos/eevblog/albums but didn't spot anything. Rigol Service Manual MSO5000-E series attached. Direct download here https://www.rigol.eu/Public/Uploads/uploadfile/files/ftp/%E6%96%B0%E8%B5%84%E6%96%99%E5%BA%93-%E5%90%AB%E6%89%8B%E5%86%8C%E5%9B%BA%E4%BB%B6%E8%BD%AF%E4%BB%B6/%E5%AE%98%E7%BD%91%E8%B5%84%E6%96%99/DS/%E6%89%8B%E5%86%8C/MSO5000-E/EN/MSO5000-E_ServiceGuide_EN.pdf |
| Navigation |
| Message Index |
| Previous page |