Author Topic: Trouble getting output on a Keithley 236 Source Meter  (Read 1189 times)

0 Members and 1 Guest are viewing this topic.

Offline PedroDaGr8

  • Super Contributor
  • ***
  • Posts: 1283
  • Country: us
  • A sociable geek chemist
Trouble getting output on a Keithley 236 Source Meter
« on: October 22, 2015, 02:58:01 pm »
I borrowed a Keithley 236 from work to run some tests on a multimeter, but I can't seem to get the device to output. I have one triaxial cable, do I need to have all three plus the banana to low? It seemed like ti should be easy but I am kinda lost with this device, it is hands over fists more than any other device I have encountered.
« Last Edit: October 22, 2015, 08:54:36 pm by PedroDaGr8 »
The very existence of flamethrowers proves that some time, somewhere, someone said to themselves, "You know, I want to set those people over there on fire, but I'm just not close enough to get the job done." -George Carlin
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf