Products > Test Equipment
Rigol MSO5000 series - rise time versus bandwidth for non-hacked 'scope
(1/1)
6SN7WGTB:
Sorry if this is a stupid question.
My Rigol MSO5104 (100MHz and not yet hacked) has a -3dB bandwidth of 146MHz.
I seem able to measure rise times down to ca. 800-1000ps for sharp pulses.
So, the software is limiting the BW to 100MHz nominally, but am I correct that the 350MHz hardware front end can indeed measure rise times within its hardware capability?
I'm judging the 'hardware capability' to be roughly determined by 350E6/0.4 = 1.2ns, or clearly slightly better if it does exceed 350Hz.
Navigation
[0] Message Index
Go to full version