Author Topic: Marconi 2955 scope problems  (Read 521 times)

0 Members and 1 Guest are viewing this topic.

Offline tech255

  • Contributor
  • Posts: 12
  • Country: gb
Marconi 2955 scope problems
« on: December 28, 2019, 09:48:36 pm »
Need a bit of help with an old Marconi 2955 I've had this machine for years and 99% of it is working fine, I've been using and repairing these machines since the late 80s and I'm familiar with most of the circuitry but this has me stumped,, the scope has developed a fault and the lower 2/3 of the screen is just green with a little bit of signal on top.

I used to have a spare unit i could swap boards out of but since acquiring several other machines i didn't need it so repaired it and sold it, I've searched all the forums and have found no info so i just hope someone out there has come across this problem before.

Ive got all the manuals and it has version 16 software
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf