Products > Test Equipment
Rigol Screen Capture VCL Windows application
<< < (4/5) > >>
robca:
Thanks!

It seems to work, both USB and LAN


--- Code: ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
03-10-2021_10-21-49.9   BEGIN TRYING LOAD VISA32.DLL
03-10-2021_10-21-49.9   Function "viOpenDefaultRM" found.
03-10-2021_10-21-49.9   Function "viFindRsrc" found.
03-10-2021_10-21-49.9   Function "viFindNext" found.
03-10-2021_10-21-49.9   Function "viOpen" found.
03-10-2021_10-21-49.9   Function "viClose" found.
03-10-2021_10-21-49.9   Function "viRead" found.
03-10-2021_10-21-49.9   Function "viWrite" found.
03-10-2021_10-21-49.9   DRIVER CORRECTLY LOADED
03-10-2021_10-21-49.9   END DRIVER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
03-10-2021_10-21-49.9   BEGIN TRYING CONNECT VIA USB
03-10-2021_10-21-50.0   Total INSTR: 1 (only one supported yet)
03-10-2021_10-21-50.0   INSTR ADDR #1: USB0::0x1AB1::0x04B0::DS2D1613xxxxx::INSTR
03-10-2021_10-21-50.0   INSTR NAME #1: RIGOL TECHNOLOGIES,DS2302A,DS2D1613xxxxx,00.03.05.SP4

03-10-2021_10-21-50.0   Model: DS2302A
03-10-2021_10-21-50.0   S/N: DS2D161xxxxxx
03-10-2021_10-21-50.0   F/W: 00.03.05.SP4

03-10-2021_10-21-50.0   END USB
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
03-10-2021_10-22-54.1   BEGIN TRYING CONNECT VIA LAN TCP (192.168.1.49)...
03-10-2021_10-22-54.1   Ping 2 ms, OK
03-10-2021_10-22-54.1   Model: DS2302A
03-10-2021_10-22-54.1   S/N: DS2D161xxxxxx
03-10-2021_10-22-54.1   F/W: 00.03.05.SP4
03-10-2021_10-22-54.1   END LAN
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

--- End code ---
(serial number removed manually)


Just double checking: upon connection, apart from the connection itself becoming green, no image is shown on the screen. The image appears only after I press "capture to clipboard". I assume it's the normal working of the program, and that there is no "real time" image capture on the screen like Ultra Sigma does. Not meant as a complain. Your program launches much faster than Ultra Sigma and it's really useful for a quick screen capture when needed
echoshack:
Hi, Just received my new DS2302A the v0.3b works fine my only issue is my network via an extender changes IP 192.168 to 169.254 so I have to check scope IP under Utility Lan menu no issue. I could not get early v0.1b to work it would error when trying to capture although it worked on my Rigol DSA815A OK.

I would like to see the option to mask the serial number. I am a Delphi user as hobbyist if you would consider releasing the source? I will try an contact you direct.

Thanks Tony (Echoshack)
robca:
An address like 169.254 means that the device could not get an IP address from the DHCP. Usually that device is unreachable.

Wouldn't it be safer to assign a static IP to your Rigol and have your router reserve that address? In my DS2072A, the DHCP rarely works, so a static IP is he better/safer way to go
malefactor:
just picked up a DHO1074, and found rigol bildschirmkopie does not work  >:(

any chance you could re-post the latest version of this tool?  or the source, if it needs to be fixed/improved?
coromonadalix:
@SERJSOCHI


thks  the software RSC 03b   is a life saver for a Rigol DS1104Z series,   their ultra  xxx  software is a mess

the rigol-bildschirmkopie does not work in my case and use old llibusb drivers
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod