Products > Test Equipment

Rigol Screen Capture VCL Windows application

<< < (4/5) > >>

robca:
Thanks!

It seems to work, both USB and LAN


--- Code: ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
03-10-2021_10-21-49.9   BEGIN TRYING LOAD VISA32.DLL
03-10-2021_10-21-49.9   Function "viOpenDefaultRM" found.
03-10-2021_10-21-49.9   Function "viFindRsrc" found.
03-10-2021_10-21-49.9   Function "viFindNext" found.
03-10-2021_10-21-49.9   Function "viOpen" found.
03-10-2021_10-21-49.9   Function "viClose" found.
03-10-2021_10-21-49.9   Function "viRead" found.
03-10-2021_10-21-49.9   Function "viWrite" found.
03-10-2021_10-21-49.9   DRIVER CORRECTLY LOADED
03-10-2021_10-21-49.9   END DRIVER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
03-10-2021_10-21-49.9   BEGIN TRYING CONNECT VIA USB
03-10-2021_10-21-50.0   Total INSTR: 1 (only one supported yet)
03-10-2021_10-21-50.0   INSTR ADDR #1: USB0::0x1AB1::0x04B0::DS2D1613xxxxx::INSTR
03-10-2021_10-21-50.0   INSTR NAME #1: RIGOL TECHNOLOGIES,DS2302A,DS2D1613xxxxx,00.03.05.SP4

03-10-2021_10-21-50.0   Model: DS2302A
03-10-2021_10-21-50.0   S/N: DS2D161xxxxxx
03-10-2021_10-21-50.0   F/W: 00.03.05.SP4

03-10-2021_10-21-50.0   END USB
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
03-10-2021_10-22-54.1   BEGIN TRYING CONNECT VIA LAN TCP (192.168.1.49)...
03-10-2021_10-22-54.1   Ping 2 ms, OK
03-10-2021_10-22-54.1   Model: DS2302A
03-10-2021_10-22-54.1   S/N: DS2D161xxxxxx
03-10-2021_10-22-54.1   F/W: 00.03.05.SP4
03-10-2021_10-22-54.1   END LAN
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

--- End code ---
(serial number removed manually)


Just double checking: upon connection, apart from the connection itself becoming green, no image is shown on the screen. The image appears only after I press "capture to clipboard". I assume it's the normal working of the program, and that there is no "real time" image capture on the screen like Ultra Sigma does. Not meant as a complain. Your program launches much faster than Ultra Sigma and it's really useful for a quick screen capture when needed

echoshack:
Hi, Just received my new DS2302A the v0.3b works fine my only issue is my network via an extender changes IP 192.168 to 169.254 so I have to check scope IP under Utility Lan menu no issue. I could not get early v0.1b to work it would error when trying to capture although it worked on my Rigol DSA815A OK.

I would like to see the option to mask the serial number. I am a Delphi user as hobbyist if you would consider releasing the source? I will try an contact you direct.

Thanks Tony (Echoshack)

robca:
An address like 169.254 means that the device could not get an IP address from the DHCP. Usually that device is unreachable.

Wouldn't it be safer to assign a static IP to your Rigol and have your router reserve that address? In my DS2072A, the DHCP rarely works, so a static IP is he better/safer way to go

malefactor:
just picked up a DHO1074, and found rigol bildschirmkopie does not work  >:(

any chance you could re-post the latest version of this tool?  or the source, if it needs to be fixed/improved?

coromonadalix:
@SERJSOCHI


thks  the software RSC 03b   is a life saver for a Rigol DS1104Z series,   their ultra  xxx  software is a mess

the rigol-bildschirmkopie does not work in my case and use old llibusb drivers

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod