Author Topic: Rigol Ultra Sigma software with DS1054Z  (Read 2868 times)

0 Members and 1 Guest are viewing this topic.

Offline Ecklar

  • Regular Contributor
  • *
  • Posts: 50
  • Country: us
  • Hobbyist
Rigol Ultra Sigma software with DS1054Z
« on: July 05, 2015, 09:28:44 pm »
Has anyone here actually used Rigol Ulta Sigma software to reset or reload upgrades to their DS1054Z?  Did it work?   

Offline alsetalokin4017

  • Super Contributor
  • ***
  • Posts: 2055
  • Country: us
Re: Rigol Ultra Sigma software with DS1054Z
« Reply #1 on: July 05, 2015, 10:28:24 pm »
Yes, I have done so, and it did work, using Windows 7 computer.

But since I usually use a Linux computer for my daily work, I find it easier to use telnet over the LAN connection to communicate SCPI commands with the scope.
The easiest person to fool is yourself. -- Richard Feynman

Offline JohnPen

  • Regular Contributor
  • *
  • Posts: 238
  • Country: gb
Re: Rigol Ultra Sigma software with DS1054Z
« Reply #2 on: July 06, 2015, 07:48:17 am »
I tried to delete all the Trial options using Ultra Sigma (Windows 7) which returned a 'timed out' response but action completed.  The Trial options however remained in place. However on sending an Install all options DSER this cleared the original Trial options and installed all the upgrades satisfactorily.  I believe there is a mention of this in the main DS1054Z posts some time ago and that once you remove the Trial options you cannot restore them. Of course that doesn't matter as the DSER code has brought all the options back.


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo