Products > Test Equipment
LCR Impedance Viewer for Picoscope+Keysight+R&S Bode Plot Data (open source)
<< < (9/30) > >>
Evodad:
Just answered but that reply does seem to have gone into Cyberspace....
_Wim_:

--- Quote from: Evodad on April 21, 2019, 10:56:20 am ---into Cyberspace....

--- End quote ---

My debugger does not run wel there...  ::)
Evodad:
Added Log first changed to .txt then zipped and changed to .txt, will it post :)

YES, this worked better !!!
_Wim_:

--- Quote from: Evodad on April 21, 2019, 11:02:09 am ---Added Log first changed to .txt then zipped and changed to .txt, will it post :)

YES, this worked better !!!

--- End quote ---

Something is not correct, because the file does not contain any readable text. Normally you should be able to open this file in notepad and see something like this:


--- Code: ---2019-03-07 22:02:35,865 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetDoubleValue: SettingName:StartFrequencyHz DefaultValue:100
2019-03-07 22:02:35,904 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:StartFrequencyHz
2019-03-07 22:02:35,908 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:35,913 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetIntValue: SettingName:ExtraSettlingTimeMs DefaultValue:30
2019-03-07 22:02:35,919 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:ExtraSettlingTimeMs
2019-03-07 22:02:35,926 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:35,934 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetDoubleValue: SettingName:StimulusOffset DefaultValue:0
2019-03-07 22:02:35,941 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:StimulusOffset
2019-03-07 22:02:35,950 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:35,956 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetDoubleValue: SettingName:InitialStimulus DefaultValue:0,1
2019-03-07 22:02:35,963 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:InitialStimulus
2019-03-07 22:02:35,966 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:35,973 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetDoubleValue: SettingName:OutputDCOffset DefaultValue:0
2019-03-07 22:02:35,978 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:OutputDCOffset
2019-03-07 22:02:35,986 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:35,995 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetStringValue: SettingName:OutputChannel DefaultValue:B
2019-03-07 22:02:36,001 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:OutputChannel
2019-03-07 22:02:36,006 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:36,010 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetStringValue: SettingName:OutputAttenuation DefaultValue:X1
2019-03-07 22:02:36,016 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:OutputAttenuation
2019-03-07 22:02:36,023 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings
2019-03-07 22:02:36,030 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsManager - GetStringValue: SettingName:OutputCoupling DefaultValue:DC
2019-03-07 22:02:36,039 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetValue fileType:Settings section:Picoscope settingName:OutputCoupling
2019-03-07 22:02:36,046 [1] DEBUG WHConsult.Utils.Settings.IniFiles.IniSettingsController - GetInifile fileType:Settings

--- End code ---
_Wim_:
Can you try to copy the app to your local C-drive with a short pathname and execute it from there?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod