Products > Test Equipment

Rohde FSEM hangs on startup

(1/1)

hafrse:
Hello,

I have a FSEM  that boots correctly but hangs on loading the transputers, I replaced the CPU card with my other FSEA, boots fine and loads all the modules. Any clue what that can be?

Addind picture of the CPU card (bios 3.3)  and where it hangs

dxl:
Likely some problem on the Address/Data bus that goes to the other modules - guess you have no schematics of this board?

dxl:
I now have a ZVRE which has a similar problem it boots, but hangs most of the time at the splash screen. I get some transputer download errors. Unfortunately i don't have another CPU board to test whether that is the same problem as you have. I posted report here: https://www.eevblog.com/forum/repair/rohde-schwarz-zvre-hanging/msg4432519/#msg4432519

nctnico:
I'd start by re-seating (removing / plugging back in) everything that is fitted in a socket.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks WYSIWYG Editor
Powered by SMFPacks Advanced Attachments Uploader Mod