Products > Test Equipment

Rohde & Schwarz CMU200

<< < (23/71) > >>

usagi:
cmu200 has no directional coupler.

took me a while to figure out how to do RL with freeres. if i remember you have to use RF3 out with RF1 in.

Ringmodulator:
Hi,

for my understanding, the CMU-B95 ADDITIONAL RF GENERATOR limits the max RF input to 2W.

 Is it sufficient to remove this unit, to be able to use the full RF input of 50W, or do I need some kind of "jumper cable" to bridge the connections of the removed board?

Chris

RF_fanatic:
Yes, use AMPS option of the CMU and the audio output which can be attached to any audio input of a normal amplifier and you can use it as tuner (fm demodulated)

cmu2017:
Hi,

I would place my tracing generator into the CMU. So does anyone know if there is somewhere 12v inside available? And it would be nice if this 12v can be switch on and off by one of the (function) keys on the front.

Does anyone know if this is possible?

Qw3rtzuiop:
There are two 12V rails inside. One is always present (12V standy). The other rail is available on power up. Afaik there is no switchable rail.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod