Products > Test Equipment

Rohde & Schwarz CMU200

<< < (47/71) > >>

heavenway:
thank u Chris, seems to be upconvert dc-10mhz signals or am i wrong? still looking for a good unit to my purposes .02 of course  :box:

Ringmodulator:
Yes, it uses the CMU200 RF out as LO at 2GHz.
0-10MHz will then be upconverted to 2.0-2.01 GHz and you can display the spectrum there.

There are similar mixers available on ebay with a shielded housing, which will also do the job.
Then you need cables and adaptors seperatly.

Regards
Chris

heavenway:
need te CMU200 first  :-DD

balage:
I think the Ebay mixers have the HMC213 IC from Hittie/Analog Devices. Can anybody confirm this?

I am building my own, with a self-designed PCB. I think I will sell out the remaining PCBs.

Ringmodulator:
Hi,

mine is on a BG7TBL board and uses a HMC213.
There is nothing else beside this one and the SMAs on the board.

Chis

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod