Products > Test Equipment
Rohde & Schwarz CMU200
ps:
--- Quote from: dcarr on March 08, 2020, 01:10:48 am --- I suspect that the it's important to use a SD (or MMC) card below a certain size...
--- End quote ---
At least you can exclude everything above 2 GB because this is the maximum possible size for a SD/MMC card. Anything bigger is SDHC or SDXC.
lucaspnw:
Hi thread. I just got a CMU200, and after some keyboard / battery repair it works. It's quite old and uses BASE 3.52. It does have B12, B21 (Universal Signaling Unit), B41 (audio), B52 (speech coder), B53 (Bluetooth), and B83.
It does have 256MB RAM and the AMD K6.
It seems to work OK. I'd like to upgrade this unit to do AMPS and Bluetooth and other software features.
Does anyone have the 5.21 software for this unit? I've tried creating a Versions.new and copying BASEV5.21.exe and other files to the PCMCIA, but the versionmanager program does not list the "Install software" option. I've also tried to copy BASEV5.21.exe to C:\INTERNAL\INSTALL, but this also does not cause the install option to appear.
I do know the PCMCIA is working because versionmanager does successfully copy the log files to it when asked.
Thanks in advance!
_Wim_:
--- Quote from: lucaspnw on April 01, 2020, 11:12:45 pm ---Hi thread. I just got a CMU200, and after some keyboard / battery repair it works. It's quite old and uses BASE 3.52. It does have B12, B21 (Universal Signaling Unit), B41 (audio), B52 (speech coder), B53 (Bluetooth), and B83.
It does have 256MB RAM and the AMD K6.
It seems to work OK. I'd like to upgrade this unit to do AMPS and Bluetooth and other software features.
Does anyone have the 5.21 software for this unit? I've tried creating a Versions.new and copying BASEV5.21.exe and other files to the PCMCIA, but the versionmanager program does not list the "Install software" option. I've also tried to copy BASEV5.21.exe to C:\INTERNAL\INSTALL, but this also does not cause the install option to appear.
I do know the PCMCIA is working because versionmanager does successfully copy the log files to it when asked.
Thanks in advance!
--- End quote ---
Here you can find what you need:
http://gotroot.ca/cmu200/
Exta info nicely grouped together:
http://vk4zxi.blogspot.com/2018/07/rohde-schwarz-cmu200.html
Edit: I upgraded mine to V5.21, but using an Agilent 82357b GPIB adaptor and the "remoteservicetool" software from R&S
_Wim_:
This is the remote service tool software I used
Qw3rtzuiop:
@lucaspnw
You need to execute the BASEV5.21.exe on your computer. It is a self extracting zip file.
You can also open the .exe with 7-Zip to get the files.
Than copy the new BASEV5.21 folder on your CF-card.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version