Products > Test Equipment

Rohde & Schwarz CMU200

<< < (51/71) > >>

om4ik:
Hallo

Can anybody send me bios for CMU 200 FMR6 PC board please (pentium 933MHz) ?
Very Thanx

lucaspnw:
Thanks for the replies! :palm:
Everything worked great, upgrade no problem.

Decompress the EXE files to separate directories on the PCMCIA card named after the files/versions. Ex:

├── BLTHV5.20
│   ├── ARC000.MD5
│   ├── ARC001.MD5
│   ├── ARCHIV.000
│   ├── ARCHIV.001
│   ├── CONFIG.INI
│   ├── archiv.exe
│   ├── prepupgd.bat
│   ├── readme.txt
│   ├── reconf.bat
│   ├── release.txt
│   ├── untgz.exe
│   └── untgz.md5
├── CD2KV5.20
│   ├── ARC000.MD5
│   ├── ARC001.MD5
│   ├── ARC002.MD5
│   ├── ARC003.MD5
│   ├── ARC004.MD5
│   ├── ARC005.MD5
│   ├── ARC006.MD5
│   ├── ARC007.MD5
│   ├── ARC008.MD5
│   ├── ARC009.MD5
│   ├── ARCHIV.000
│   ├── ARCHIV.001
│   ├── ARCHIV.002
│   ├── ARCHIV.003
│   ├── ARCHIV.004
│   ├── ARCHIV.005
│   ├── ARCHIV.006
│   ├── ARCHIV.007
│   ├── ARCHIV.008
│   ├── ARCHIV.009
│   ├── CONFIG.INI
│   ├── Prepupgd.bat
│   ├── UNTGZ.md5
│   ├── archiv.exe
│   ├── readme.txt
│   ├── reconf.bat
│   ├── release.txt
│   └── untgz.exe

hi3cmz:
Hi, sorry for hijak the thread, but I am pretty sure that here is the place some if not all of my question might be answered.

1- Does cmu200 or CRTU-RU works under 100 khz? say 85 Khz?
2- It is possible to, modify as less as possible, write/append new K-like options that one need into CMU200, CRTU-RU/PU?
3- If preview question is yes, then what will be better, CMU200 or CRTU-RU?


Thanks!

Octane:
Hi,

I’m pretty sure, the following answers are correct:

1) No. as far as I remember the generator starts at 100kHz and the spectrum analyzer at 10MHz. Or the other way round.

2) I doubt it. Everything is closed source.

3) N/A

4) I don’t understand the question...

5) The AMU200 is a totally different thing. It is a baseband signal generator and fading simulator.


I hope that answers your questions at least partly.

BR,
Michael

Octane:
Hi,

Does anyone know the differences between a CMU200 and a CMU300 by heart? Looking through the specs and manuals they seem identical.

Thanks,
Michael

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod