Author Topic: rohde & schwarz fsp13  (Read 1892 times)

0 Members and 1 Guest are viewing this topic.

Offline dencyaupinTopic starter

  • Newbie
  • Posts: 6
  • Country: de
rohde & schwarz fsp13
« on: June 29, 2021, 04:51:08 pm »
Hello everyone! I became the proud owner of a rohde & schwarz fsp13 Spectrum Analyzer, but unfortunately it does not pass the self test and does not start calibration. Reference signal level 128MHz sees at 0dbm -26dbm! The level of the external 10GHz generator is fully met. Tell me where to dig? Analyzer above 3 GHz works fine.
« Last Edit: June 29, 2021, 05:33:16 pm by dencyaupin »
 

Offline dencyaupinTopic starter

  • Newbie
  • Posts: 6
  • Country: de
Re: rohde & schwarz fsp13
« Reply #1 on: June 30, 2021, 06:26:19 pm »
Diode Ring Mixer?
 

Offline dencyaupinTopic starter

  • Newbie
  • Posts: 6
  • Country: de
Re: rohde & schwarz fsp13
« Reply #2 on: December 19, 2023, 01:27:27 pm »
Hello everyone, does no one know this diode assembly? I installed BAT15 and everything worked
 
The following users thanked this post: egonotto

Offline dencyaupinTopic starter

  • Newbie
  • Posts: 6
  • Country: de
Re: rohde & schwarz fsp13
« Reply #3 on: January 19, 2024, 10:48:32 am »
Why does no one know the part number for this part???
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf