Products > Test Equipment
Rohde & Schwarz Hameg HM6050-2 LISN Teardown
(1/1)
vzoole:
I just changed my homemade LISN and I thought it would be a good idea to look inside of the new one.
dhia.chariag:
Hello,

our Hameg HM6050-2 LISN is damage, and I need the references of the components in the picture below, if you can send me the reference of that components Thanks

Sincerly 
vzoole:
It is glued to the PCB so I wouldn't desolder it for measure if it isn't necessary. But my best guess is two 100 Ohm paralel.
Hydron:
That's pretty much the best possible 1% tolerance value - no ambiguity even if you can't tell which band is the tolerance one :)
Jar:
Hi.

How is it in work?

I got issue with mine. measure on L with limiter off got 10dBuV more noise in range below 300KNz compared with N. No DUT connected.

if I swap power plug of HM6050 180 degree. nothing changes(I expected to have noise moved to N). That makes me thing it comes from LISN it self(
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod