Products > Test Equipment
Rohde & Schwarz Oscilloscopes - Questions/Comments? Let me know!
<< < (44/75) > >>
LaurentR:
Hi Rich,
do you know when the User Manual will get updated to reflect the firmware additions?
mikeselectricstuff:
Minor bug on RTM3004 - not sure if it is new in the new FW, not tested on RTB2000
If you have UART TX and RX decode, then go to zoomed mode, the TX and RX traces overlap ( does it regardless of decode trace height) 
Kean:

--- Quote from: Rich@RohdeScopesUSA on June 05, 2018, 12:07:28 pm ---The new firmware for the 2000/3000/4000 has released (you've probably already seen the 2000 firmware that came out about a week ago, but just in case):

--- End quote ---
Rich, is there somewhere we can subscribe to notifications of firmware or errata?  Other than this thread I mean.
I had a look around the website, but didn't find a place to register for this.  I am starting from the R&S AU website... but this is easy on Keysight and Rigol websites!  >:D
sixtimesseven:
Hi Rich

The new firmware worked so far and added some nice additions, thank you.
I would have some additional small feature requests:

On the decoder side:
1. RS422/485 decoding options
2. Ability to export the time difference between packages on the protocol list to cvs as well
3. Ability to get the protocol list data via browser / scpi to the pc

On the analog side
1. Bode plotting for mag/phase with the integrated sig. gen. Carrying a pc to do it in software is a pain.

Thank you so much!
mikeselectricstuff:

--- Quote from: sixtimesseven on June 13, 2018, 09:33:29 am ---Hi Rich

The new firmware worked so far and added some nice additions, thank you.
I would have some additional small feature requests:

On the decoder side:
1. RS422/485 decoding options

--- End quote ---
This can be done using UART decode in the vast majority of situations. If your data is so noisy that you really need the differential input then you probably have bigger problems than protocol decoding.
 
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod