| Products > Test Equipment |
| Rohde & Schwarz Oscilloscopes - Questions/Comments? Let me know! |
| << < (45/75) > >> |
| sixtimesseven:
--- Quote from: mikeselectricstuff on June 13, 2018, 09:39:51 am --- --- Quote from: sixtimesseven on June 13, 2018, 09:33:29 am ---Hi Rich The new firmware worked so far and added some nice additions, thank you. I would have some additional small feature requests: On the decoder side: 1. RS422/485 decoding options --- End quote --- This can be done using UART decode in the vast majority of situations. If your data is so noisy that you really need the differential input then you probably have bigger problems than protocol decoding. --- End quote --- Hi Mike Yes this is true. However we often have rather long and noisy RS422 connections which I would like to probe without carrying my converter with me. Looking into the options I think all it would take is the option to decode on top of the math channel. |
| MikeP:
Rich. In the great RTM3004 review, nctnico mentioned the Autoscale function as requiring refinement. This is good feature, thanks. Unfortunately, this function turns off the REF function. And the button is not located in the most convenient way. Often Instead the channel menu, I enable the Autoscale. Is it possible to swap the Autoscale button and the Probe button? Thanks. |
| Rich@RohdeScopesUSA:
--- Quote from: sixtimesseven on June 13, 2018, 09:33:29 am ---Hi Rich The new firmware worked so far and added some nice additions, thank you. I would have some additional small feature requests: On the decoder side: 1. RS422/485 decoding options 2. Ability to export the time difference between packages on the protocol list to cvs as well 3. Ability to get the protocol list data via browser / scpi to the pc On the analog side 1. Bode plotting for mag/phase with the integrated sig. gen. Carrying a pc to do it in software is a pain. Thank you so much! --- End quote --- Thanks - this is good feedback. It looks like you may have already answered one of my questions on the 422/485 - basically you'd like to be able to use a math function to subtract two channels and then decode on that function? Is that correct? -Rich |
| sixtimesseven:
--- Quote from: Rich@RohdeScopesUSA on June 13, 2018, 02:26:18 pm --- --- Quote from: sixtimesseven on June 13, 2018, 09:33:29 am ---Hi Rich The new firmware worked so far and added some nice additions, thank you. I would have some additional small feature requests: On the decoder side: 1. RS422/485 decoding options 2. Ability to export the time difference between packages on the protocol list to cvs as well 3. Ability to get the protocol list data via browser / scpi to the pc On the analog side 1. Bode plotting for mag/phase with the integrated sig. gen. Carrying a pc to do it in software is a pain. Thank you so much! --- End quote --- Thanks - this is good feedback. It looks like you may have already answered one of my questions on the 422/485 - basically you'd like to be able to use a math function to subtract two channels and then decode on that function? Is that correct? -Rich --- End quote --- Yes, that would be great! |
| sixtimesseven:
Rich, I found a new reference to option R&S RTB-K18 "spectrum analysis". Are new options coming ;D? |
| Navigation |
| Message Index |
| Next page |
| Previous page |