Products > Test Equipment
Rohde & Schwarz Oscilloscopes - Questions/Comments? Let me know!
sixtimesseven:
Yeah, I agree that R&S should have put them into the package. They seem to be in the ZP05 probe package, but not in the standard ZP03 ... And I don't see how to order them seperatly :-//
KaneTW:
That kind of sucks, especially for the money a RTB2004 costs.
Accessory package on the ZP10 seems better, too:
--- End quote ---
E: http://www.datatec.de/RS-RT-ZA1-Zubehoer-Oszilloskop-Probe.htm http://www.datatec.de/RS-RT-ZA4-Zubehoer-Oszilloskop-Probe.htm http://www.datatec.de/RS-RT-ZA5-Zubehoer-Oszilloskop-Probe.htm :-DD
sixtimesseven:
--- Quote from: KaneTW on July 04, 2018, 02:31:43 pm ---That kind of sucks, especially for the money a RTB2004 costs.
Accessory package on the ZP10 seems better, too:
--- End quote ---
E: http://www.datatec.de/RS-RT-ZA1-Zubehoer-Oszilloskop-Probe.htm http://www.datatec.de/RS-RT-ZA4-Zubehoer-Oszilloskop-Probe.htm http://www.datatec.de/RS-RT-ZA5-Zubehoer-Oszilloskop-Probe.htm :-DD
--- End quote ---
The ZP10 Probe is about 375 Euro:
http://www.datatec.de/Oszilloskop-Tastkopf-Passiv-RT-ZP10.htm
The accesoire set costs 165 Euro:
http://www.datatec.de/RS-RT-ZA1-Zubehoer-Oszilloskop-Probe.htm
So ground spring probes cost as much as the base model :-DD :-DD :-DD
And there seems to be no option for the ZP03, still a 100 Euro list price probe |O |O |O
The ZP03 even has the ring to fit a spring, but there is nothing from R&S, which is sad really. Makes the RTB200x set about a 10MHz kind of deal.
However, as I said there is bare metal exposed at the front. The diameter is 4.85mm which means a 4.5mm spring should fit.
https://au.rs-online.com/web/c/test-measurement/oscilloscopes-accessories/oscilloscope-probe-accessories/
Alternative would be the ProbeMaster springs for 2.90$ a pice:
http://probemaster.com/4983hg-high-frequency-ground/
They have more accesoire which seems to fit...
Edit: Probemaster springs...
KaneTW:
I've checked https://cdn.rohde-schwarz.com/pws/dl_downloads/dl_common_library/dl_manuals/gb_1/r/rt_zp/Manual_RT-ZP10_en.pdf and
--- End quote ---
probe is pretty bare-bones + that accessory package/clips/etc for $waytoomuch.
Silly.
gsocker:
You might also try PMK http://www.pmk.de/. At least the probes that came with my Hameg/R&S scopes (HMO, now RTO) are rebranded PMK probes. They don't seem to be widely available in the US, but might be easier to find in Europe. If they are rebranded PMK probes, you can probably get the OEM accesories cheaper through one of their distributors.
Pico appears to use their 2.5mm probes as well, and so sells some of the accessory kits. Over here, I can buy the Picotech version of the accesories for much less than the R&S versions - a USD 58 accesory kit has almost everything the R&S kit does except for the replacement spring tips. Even adding those, it's still cheaper than R&S.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version