| Products > Test Equipment |
| Rohde & Schwarz Oscilloscopes - Questions/Comments? Let me know! |
| << < (62/75) > >> |
| matseng:
Well, the issue got resolved after a nice call to Farnell. They were more than happy to immediately send me a brand new scope and have UPS come and pick the other one up. That's really good level of service. |
| rosin232:
Hi Rich I'm looking at RTO series scopes and was curious what are the real differences between RTO1000 and RTO2000? From what I seen online RTO2000 have: AWG option USB3 ports Windows 7 ( RTO1000 can be upgraded to Win7 ) Thanks! |
| Hydron:
Hi Rich, I saw this suggestion in the Siglent SDS1x04X-E thread, and agreed with tautech that it was a rather good idea, so thought I'd post it here in-case there's interest from R&S: --- Quote from: tautech on July 31, 2018, 07:38:04 am --- --- Quote from: bluejedi on July 29, 2018, 03:25:27 pm ---[Suggestion] Suggestion for new SDS1104X-E/SDS1204X-E feature: For Measure: in addition to channels CH1, CH2, CH3 and CH4 add an additional channel named Current. Current is the currently selected channel (selected via the Channel Buttons). This way Measured Items can be simply displayed for each channel by simply switching the currently selected channel via the channel buttons, without having to change the source and having to add items for that source each time. Similarly, when setting Source to Current and selecting 'All Measure On', it should display all measured items for the 'currently selected channel' (the channel selected via the channel buttons). This makes it possible to quickly switch the source channel via the channel buttons, without having to change the channel via 'Source' in the menu (which is slow and does not allow to quickly switch between measurements per channel). --- End quote --- Very good idea. :-+ All 3 of your suggestions have been forwarded to the X-E product manager. If Selected was used instead of Current there could be less resultant confusion. --- End quote --- This would be especially handy with the RTx2/3/4000 series that have the knobs lit with the current channel (and it could help reduce the impact of the 4-measurement-limit on the RTB2k by making it quicker to switch channels, though the existing interface is already better than most). |
| mtdoc:
--- Quote from: Hydron on August 01, 2018, 02:06:18 pm ---Hi Rich, I saw this suggestion in the Siglent SDS1x04X-E thread, and agreed with tautech that it was a rather good idea, so thought I'd post it here in-case there's interest from R&S: --- Quote from: tautech on July 31, 2018, 07:38:04 am --- --- Quote from: bluejedi on July 29, 2018, 03:25:27 pm ---[Suggestion] Suggestion for new SDS1104X-E/SDS1204X-E feature: For Measure: in addition to channels CH1, CH2, CH3 and CH4 add an additional channel named Current. Current is the currently selected channel (selected via the Channel Buttons). This way Measured Items can be simply displayed for each channel by simply switching the currently selected channel via the channel buttons, without having to change the source and having to add items for that source each time. Similarly, when setting Source to Current and selecting 'All Measure On', it should display all measured items for the 'currently selected channel' (the channel selected via the channel buttons). This makes it possible to quickly switch the source channel via the channel buttons, without having to change the channel via 'Source' in the menu (which is slow and does not allow to quickly switch between measurements per channel). --- End quote --- Very good idea. :-+ All 3 of your suggestions have been forwarded to the X-E product manager. If Selected was used instead of Current there could be less resultant confusion. --- End quote --- This would be especially handy with the RTx2/3/4000 series that have the knobs lit with the current channel (and it could help reduce the impact of the 4-measurement-limit on the RTB2k by making it quicker to switch channels, though the existing interface is already better than most). --- End quote --- Yes! That would be excellent for the RTB2K. Please consider this. |
| nctnico:
On the RTM3000 it is very easy to change the measurement type and channel without needing to erase a measurement. Actually you can't erase measurements on the RTM3000; only enable/disable displaying the measurement. I suspect the RTB2000 works the same. |
| Navigation |
| Message Index |
| Next page |
| Previous page |