Products > Test Equipment
Rohde & Schwarz Oscilloscopes - Questions/Comments? Let me know!
<< < (17/75) > >>
Rich@RohdeScopesUSA:

--- Quote from: lem_ix on March 23, 2017, 03:19:09 pm ---Hi Rich,

Is the RTB compatible with the Hameg HO3508 logic probe? Got a hmo and probably getting a second scope soon so compatibility would be nice.

--- End quote ---
Was able to track this down.  The short answer is yes, the HO3508 will work on the RTB.  The longer answer is you have to be careful with the ZL03 (replacement for the HO3508) going to a Hameg and back to the RTB.  If you run alignment on the HMO it will flash those alignment values to the ZL03.  The RTB's ZL03s are calibrated at the factory, so there is no alignment routine for them on the RTB and the ZL03 would need to be sent back in to be realigned.

TL;DR:  HO3508 works on RTB.  Don't use ZL03 on HMO and run alignment and then bring it back to RTB.  Best to keep your ZL03 with your RTBs.

-Rich
Octane:
Hi Rich,

I just got my RTB2004 launch special. Awesome scope. Just one comment: R&S should really supply the correct color probe cable markers.
The trace colors on the scope are yellow, green, orange and blue. The colors of the small clips that come with the probes are: green, orange, blue and pink. So pink is totally wrong and the blue is a darker one compared to the trace on the scope, which probably is not too bad.

Just wanted to mention this.

Michael
R005T3r:
Hi,

I wanted to ask about the NGE103 PSU because the broshure does not mention about it. If you can use the PSU as a total of three separated units, can you serialize two channels in opposite order? Let's say to  split  30V in +15 and -15 by connecting the ground of one channel to the hot of another and using the bridge as ground?

Thanks.
Octane:
Yes, you can. The three channels are fully floating and isolated. I'll hopefully get mine today, so if you want to know anything more just ask. Although I have to mention that I'm just building up my lab here, so I don't have much stuff yet to try.
Rich@RohdeScopesUSA:
Thanks Octane!

-Rich
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod