EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: Carrington on December 04, 2013, 12:23:13 am

Title: RP3300 HF compensation.
Post by: Carrington on December 04, 2013, 12:23:13 am

Hi guys!

In my RP3300 probe the hole that allows access to the HF compensation is covered.
Anyone know if the trimmer remains below?

(https://www.eevblog.com/forum/testgear/rp3300-hf-compensation/?action=dlattach;attach=69588;image)

http://www.batronix.com/pdf/Rigol/RP3300.pdf (http://www.batronix.com/pdf/Rigol/RP3300.pdf)

Thanks.

Title: Re: RP3300 HF compensation.
Post by: Harvs on December 04, 2013, 12:28:22 am

That's because the trimmer is in the box that's on the BNC connector end of the lead.

Title: Re: RP3300 HF compensation.
Post by: Carrington on December 04, 2013, 11:04:41 am

Quote from: Harvs on December 04, 2013, 12:28:22 am

That's because the trimmer is in the box that's on the BNC connector end of the lead.

Are you saying that the HF trimmer is also in that box?  :-//

(https://www.eevblog.com/forum/testgear/rp3300-hf-compensation/?action=dlattach;attach=69621;image)

Title: Re: RP3300 HF compensation.
Post by: Harvs on December 04, 2013, 12:19:09 pm

Sorry, I've never actually read the manual, I assumed there was only ever the one trimmer.  I've got no idea  :-//