Products > Test Equipment
RPL1116 (MSO1000Z) and PLA2216 (MSO5000) Active Logic Probe teardown
Mechatrommer:
--- Quote from: beta-tester on May 01, 2024, 05:48:35 pm ---my hope was to buy a ready to use one with the right connectors on.
--- End quote ---
when there's not enough demand, nobody is willing to make, including china cloners...
--- Quote from: beta-tester on May 01, 2024, 05:48:35 pm ---any idea what connector type fits to the RPL1116's flat cable connector?
--- End quote ---
if you cant find 2x34 IDC female 2.54mm pitch connector, maybe you can connect 2x20 and 2x14... https://www.aliexpress.com/item/1005001988246610.html ymmv for connector to DHO900, its 2x25 female pin, you can find somewhere else in ali, you got the idea.
beta-tester:
--- Quote from: Mechatrommer on May 01, 2024, 07:26:22 pm ---
--- Quote from: beta-tester on May 01, 2024, 05:48:35 pm ---any idea what connector type fits to the RPL1116's flat cable connector?
--- End quote ---
if you cant find 2x34 IDC female 2.54mm pitch connector, maybe you can connect 2x20 and 2x14... https://www.aliexpress.com/item/1005001988246610.html ymmv for connector to DHO900, its 2x25 female pin, you can find somewhere else in ali, you got the idea.
--- End quote ---
and again an aliexpress link that will be dead in few weeks. >:(
the connector on the RPL1116 is not 2.54mm pitch it is 1.27mm pitch. the outer plastic is rectangle, the inner shape is a "trapezoidal". in my photo of the RPL1116 connector, the left side is distorted by the macro lens - but the right side shows the correct shape.
somewhere they told it is a kind of scsi-III external connector, but i couldn't find one with this shape.
EDIT: i attached a photo of the connector on the DS1074Z Plus side - for such a connector i am looking for.
Kean:
--- Quote from: beta-tester on May 02, 2024, 05:21:59 pm ---EDIT: i attached a photo of the connector on the DS1074Z Plus side - for such a connector i am looking for.
--- End quote ---
Search for "HPDB68" which is the 68-pin "Wide SCSI-2" connector with male pins (D shaped and not Centronics style). Also commonly called "SCSI-3".
zx2336:
Hello, sorry to bother you. I am unable to open your STM32 project file in Visual studio, it flashes back for unknown reasons. Could you please compile a hex binary burn file and upload it?
I don't speak English very well, I used Google Translate to translate some parts of this paragraph, please forgive me if there is any errata, thanks again from the bottom of my heart!
Navigation
[0] Message Index
[*] Previous page
Go to full version