Products > Test Equipment

RS PRO / Siglent 1052DL+ stuck at boot logo.

<< < (4/14) > >>

PapaEnte:
Hi all,

I have a similar problem. The oscilloscope turns on and displays the RS logo. After a while, most of the keys turn dark but apart from that - nothing happens. It still displays the logo and doesn't react to any key presses.

I have tried a hardware reset by repeatedly pressing the Math button after turning the device on. Unfortunately it doesn't help (even after many tries).

How could I get the USB firmware reset tool?

Your help would be much appreciated.

PapaEnte:
Thanks to tautech, I got the oscilloscope working again!

Thank you! You are awesome  :-+

legera:
Hello I have the same problem with my 1052DL+... I get stuck at logo boot, I tried to hard reset by pressing MATH but nothing happens ... Could you please help me ? Thx in advance.

kilot78:
Good afternoon I'm new to the forum.
I have a problem with the RS Pro RSDS 1052DL+ oscilloscope
Hangs on the splash screen, tried to do a hard reset according to the instructions on the forum, unfortunately it did not help.
I really ask for help and I apologize for my English.
Thank you.

JeanDortPlus:
Hello I have the same problem with my RSDS 1052DL+... I get stuck at logo boot
 I tried to hard reset by pressing MATH but nothing happens ...
(the device remained off for 2 years)
Could you please help me ?
Thanks
Jean

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod