Author Topic: RS PRO / Siglent 1052DL+ stuck at boot logo. (Read 17703 times)

rgg · « **on:** August 15, 2022, 10:25:01 pm »

Hi all,
I have a RS PRO RSDS 1052DL+ Oscilloscope (rebranded Siglent) that freezes up at the boot logo, no relays click and the front USB doesn't initialise.
I've tried the repeated pressing of the Math button during power on but no luck.
It's no longer in warranty, are there any other options for recovering?

Thanks,
Robert

tautech · « **Reply #1 on:** August 15, 2022, 10:37:34 pm »

Quote from: rgg on August 15, 2022, 10:25:01 pm

Hi all,
I have a RS PRO RSDS 1052DL+ Oscilloscope (rebranded Siglent) that freezes up at the boot logo, no relays click and the front USB doesn't initialise.
I've tried the repeated pressing of the Math button during power on but no luck.
It's no longer in warranty, are there any other options for recovering?

Thanks,
Robert

Welcome to the forum.

Possibly we can do something to help....will send PM.

rgg · « **Reply #2 on:** August 15, 2022, 11:54:01 pm »

Quote from: tautech on August 15, 2022, 10:37:34 pm

Possibly we can do something to help....will send PM.

Scope is now up and running again, thanks for your help!

tautech · « **Reply #3 on:** August 16, 2022, 12:05:19 am »

Note to all.
Report from rgg:
The Siglent SDS1052DL+ USB recovery package worked fine on this RS PRO rebrand and it kept RS PRO branding and also allowed for the latest Siglent firmware to be installed.

Another saved.

Old Printer · « **Reply #4 on:** August 16, 2022, 03:30:10 am »

Another above and beyond assist from Rob

tv84 · « **Reply #5 on:** August 16, 2022, 08:09:57 am »

Rob, "The Unbricker".

tautech · « **Reply #6 on:** August 16, 2022, 10:41:58 pm »

Quote from: tv84 on August 16, 2022, 08:09:57 am

Rob, "The Unbricker".

Some are easier than others.

Currently have a Zero poster trying to recover a SDG800.......another that's never had its firmware updated.

djpoppyk · « **Reply #7 on:** September 14, 2022, 06:39:17 pm »

Hello guys.
I'm new to the forum and I have the same problem with my Oscilloscope RSDS1102CML+. The device was bought in December 2021 but because we are on ice breaker passenger ships we miss the container in Punta Arenas and we finally received in Reykjavik , one week ago

. When I press the power button the device stay on Boot Logo. I don't want to send it back to my office and then they will send to seller.....etc......etc, because maybe I will received again in 1 year

. Can I do something to make it work? Thank you for help.

tautech · « **Reply #8 on:** September 14, 2022, 08:51:22 pm »

Quote from: djpoppyk on September 14, 2022, 06:39:17 pm

Hello guys.
I'm new to the forum and I have the same problem with my Oscilloscope RSDS1102CML+. The device was bought in December 2021 but because we are on ice breaker passenger ships we miss the container in Punta Arenas and we finally received in Reykjavik , one week ago . When I press the power button the device stay on Boot Logo. I don't want to send it back to my office and then they will send to seller.....etc......etc, because maybe I will received again in 1 year . Can I do something to make it work? Thank you for help.

Welcome to the forum.

Try this first:
https://siglentna.com/operating-tip/oscilloscope-hardware-reset/

djpoppyk · « **Reply #9 on:** September 15, 2022, 09:30:36 pm »

Thank you tautech for your answer. I try many times and many minutes but still freeze in boot logo

tautech · « **Reply #10 on:** September 15, 2022, 09:52:45 pm »

Quote from: djpoppyk on September 15, 2022, 09:30:36 pm

Thank you tautech for your answer. I try many times and many minutes but still freeze in boot logo

Check your forum mailbox.

djpoppyk · « **Reply #11 on:** September 17, 2022, 02:12:06 pm »

Thank you very much! now is working fine! thank you for your time and for your help.

aitorflores7 · « **Reply #12 on:** November 02, 2022, 09:53:00 am »

Hi everyone

I'm new in the forum. I have a Rs pro 1052dl+ stuck at boot logo. I have already used the math button procedure and it doesn't work. Do you have a USB recovery package? That would help me a lot. Thanks!

Brsmailer · « **Reply #13 on:** January 13, 2023, 11:14:53 pm »

Hi everyone,

I am having the same problem with Siglent SDS1052dl+ stuck at boot logo. Already tried multiple times hardware reset without any success. Would you be able to e-mail me USB recovery package? Thank you.

tautech · « **Reply #14 on:** January 13, 2023, 11:50:13 pm »

Quote from: Brsmailer on January 13, 2023, 11:14:53 pm

Hi everyone,

I am having the same problem with Siglent SDS1052dl+ stuck at boot logo. Already tried multiple times hardware reset without any success. Would you be able to e-mail me USB recovery package? Thank you.

Pop me a personal message with your email and we'll sort this for you.

PapaEnte · « **Reply #15 on:** March 12, 2023, 09:27:49 pm »

Hi all,

I have a similar problem. The oscilloscope turns on and displays the RS logo. After a while, most of the keys turn dark but apart from that - nothing happens. It still displays the logo and doesn't react to any key presses.

I have tried a hardware reset by repeatedly pressing the Math button after turning the device on. Unfortunately it doesn't help (even after many tries).

How could I get the USB firmware reset tool?

Your help would be much appreciated.

PapaEnte · « **Reply #16 on:** March 14, 2023, 07:57:41 pm »

Thanks to tautech, I got the oscilloscope working again!

Thank you! You are awesome

legera · « **Reply #17 on:** May 19, 2023, 01:08:04 pm »

Hello I have the same problem with my 1052DL+... I get stuck at logo boot, I tried to hard reset by pressing MATH but nothing happens ... Could you please help me ? Thx in advance.

kilot78 · « **Reply #18 on:** July 24, 2023, 02:07:06 pm »

Good afternoon I'm new to the forum.
I have a problem with the RS Pro RSDS 1052DL+ oscilloscope
Hangs on the splash screen, tried to do a hard reset according to the instructions on the forum, unfortunately it did not help.
I really ask for help and I apologize for my English.
Thank you.

JeanDortPlus · « **Reply #19 on:** July 27, 2023, 04:34:26 am »

Hello I have the same problem with my RSDS 1052DL+... I get stuck at logo boot
I tried to hard reset by pressing MATH but nothing happens ...
(the device remained off for 2 years)
Could you please help me ?
Thanks
Jean

JeanDortPlus · « **Reply #20 on:** July 27, 2023, 07:41:17 am »

Thanks a lot Rob
It's working with the USB boot

Damn The Man · « **Reply #21 on:** August 09, 2023, 04:20:01 pm »

This seems to be a bit of a theme, I'm afraid I have the same issue with an RSDS 1102CML+. I understand this is a rebranded Siglent, so I have tried the reboot/reset math button to no avail. I also tried uploading new firmware from USB but without being able to get past the boot screen I'm a bit stumped on how to access the files in the first place.

Damn The Man · « **Reply #22 on:** August 10, 2023, 09:02:47 pm »

Thanks to tautech for getting my scope fixed! Absolute superstar!

ghtrig · « **Reply #23 on:** September 18, 2023, 08:34:44 am »

Please help me with the same problem. My SDS 1052 DL+ stuck on sturt up window. No effect from pressin "math" button!

ghtrig · « **Reply #24 on:** September 19, 2023, 10:07:00 am »

Many many thanks tautech! My oscilloscope is working again!

Oknaj · « **Reply #25 on:** October 31, 2023, 06:34:45 pm »

Hello, same with me! It is the second time this has happened.
First time, I send it back to seller and they fixed the scope.
Since this is a normal behaviour for this type of device, I would like to be able to repair it all alone, without waiting several days (or weeks) for the seller.
Can I have this recovery package, please?

Siglent SDS1102CML+
Tried the "math" button trick, with no success.

LucHeylens · « **Reply #26 on:** November 02, 2023, 05:53:43 pm »

Hello everybody,

My Siglent 1052DL+ stays frozen at boot screen (SIGLENT splash screen).
Of course, I tried the "heart massage" on the MATH button, many times, but it does not help.

Can someone help by sending me the famous "USB recovery package" (that seems to be THE solution).

Many thanks in advance !
Luc

tautech · « **Reply #27 on:** November 02, 2023, 06:38:12 pm »

Quote from: LucHeylens on November 02, 2023, 05:53:43 pm

Hello everybody,

My Siglent 1052DL+ stays frozen at boot screen (SIGLENT splash screen).
Of course, I tried the "heart massage" on the MATH button, many times, but it does not help.

Can someone help by sending me the famous "USB recovery package" (that seems to be THE solution).

Many thanks in advance !
Luc

Welcome to the forum.

Yes, the only solution when MATH does not work.

Send PM with your email contact.

Andrea2603 · « **Reply #28 on:** December 12, 2023, 11:05:59 am »

Hello everyone, after searching online I stumbled on this site.
I guess I have the same problem as you guys have, got a RS1052DL+ stuck on boot screen.
Tried multiple times the math button reset but haven’t worked.
Any kind soul could help me with the usb reset?
Thank you everyone

Andrea

tautech · « **Reply #29 on:** December 12, 2023, 11:15:55 am »

Quote from: Andrea2603 on December 12, 2023, 11:05:59 am

Hello everyone, after searching online I stumbled on this site.
I guess I have the same problem as you guys have, got a RS1052DL+ stuck on boot screen.
Tried multiple times the math button reset but haven’t worked.
Any kind soul could help me with the usb reset?
Thank you everyone

Andrea

Welcome to the forum.

Check your messages.

malinda · « **Reply #30 on:** December 29, 2023, 05:19:41 pm »

Hello I have the same problem with my RSDS 1052DL+... I get stuck at logo boot
From Sri Lanka

jtorregl · « **Reply #31 on:** February 01, 2024, 11:00:21 am »

Hello to everybody

I'm happy to read that the problem with my oscilloscope has solution.

In my case, I have a RSDS 1152CML+ (150 MHz) and it is brozen showing a screen with the RS PRO logo. I've tried the solution of the "Math button" but it didn't work.

I read in the forum that there is the posibility of reinstalling the software via USB or somethink like it. Please, don't hesitate to contact me and send me the files to try to fix the oscilloscope.

Thanks in advance.

Kit · « **Reply #32 on:** February 14, 2024, 05:26:21 pm »

Hello everybody, my SIGLENT SDS1202X-E (buy it in december 2023) start up fine but any control doesn't works, several minutes later is working again.
math button trick not work at all. Please help me. Thank you.

Note: My house do not have earth connection (ground). This will can be a problem?. Excuse my poor english!!.

adam4521 · « **Reply #33 on:** February 14, 2024, 06:19:28 pm »

Quote from: Kit on February 14, 2024, 05:26:21 pm

Note: My house do not have earth connection (ground). This will can be a problem?.

Yes, you need to have that fixed. Check local codes but TT system, at least.

Kit · « **Reply #34 on:** February 14, 2024, 09:35:05 pm »

Quote from: adam4521 on February 14, 2024, 06:19:28 pm

Quote from: Kit on February 14, 2024, 05:26:21 pm

Note: My house do not have earth connection (ground). This will can be a problem?.

Yes, you need to have that fixed. Check local codes but TT system, at least.

I used this oscilloscope in other place with earth connection and happens the same.

Thank you.

lsara · « **Reply #35 on:** February 21, 2024, 05:07:46 pm »

Same issue with oscilloscope RS PRO RSDS 1072CML+ ! it stays in the RS Logo.

Could I have the recovery package please?

Many thanks!

lsara · « **Reply #36 on:** February 22, 2024, 03:34:16 pm »

Many thanks, the fix worked!!

neskor · « **Reply #37 on:** May 04, 2024, 12:44:22 pm »

Hello I have the same problem with my RS PRO RSDS1072CML+, stuck at RS logo boot.
Can I please have this recovery package.
Thanks in advance.

James2680 · « **Reply #38 on:** May 13, 2024, 03:48:27 am »

Hi, looks like this is a common problem. Mine was working last Thursday and then Friday no go. I to have a SDS1102 DL+, stuck on boot screen still under warranty, but if i can avoid sending it away and losing 2 week that would be great.

Can you please supply me the fix tautech as well?

Many thanks in advance and for all the help you have provided here on this thread.

tautech · « **Reply #39 on:** May 13, 2024, 06:35:13 am »

Quote from: James2680 on May 13, 2024, 03:48:27 am

Hi, looks like this is a common problem. Mine was working last Thursday and then Friday no go. I to have a SDS1102 DL+, stuck on boot screen still under warranty, but if i can avoid sending it away and losing 2 week that would be great.

Can you please supply me the fix tautech as well?

Many thanks in advance and for all the help you have provided here on this thread.

Welcome to the forum.

Please send PM with your email address.

James2680 · « **Reply #40 on:** May 15, 2024, 01:06:21 pm »

Well finally got to town and purchased an 8Gb usb drive. Not many places stock the 8Gb's. Did as instructed and I now have a working oscilloscope. Many thanks tautech you saved me time and money.

DelticEngine · « **Reply #41 on:** May 18, 2024, 02:23:54 pm »

I have the same problem, but with a different device. I have an RSPro RSDS 1072CML+ which, as far as I know, is a rebadged Siglent SDS1072CML+. I read about the method using the 'Math' button but this did not fix the problem and my 'scope it still stuck on the boot logo. I also tried downloading firmware from Siglent and put it onto a clean 1GB flash drive. The 'scope read the flash drive but nothing changed. Is there a special firmware or software that I can put onto a USB flash drive to fix my 'scope ?

neskor · « **Reply #42 on:** May 20, 2024, 09:07:26 am »

I have now a working oscilloscope.

Thank you Tautech!!!

mrivett · « **Reply #43 on:** July 22, 2024, 06:11:39 am »

Hello

I have the same problem with my RS PRO RSDS1052DL+, which is stuck at the RS logo boot.

Can anyone send me this this recovery package.

Many Thanks

tautech · « **Reply #44 on:** July 22, 2024, 07:21:01 am »

Quote from: mrivett on July 22, 2024, 06:11:39 am

Hello

I have the same problem with my RS PRO RSDS1052DL+, which is stuck at the RS logo boot.

Can anyone send me this this recovery package.

Many Thanks

Welcome to the forum.

Check your messages.

slawekmod · « **Reply #45 on:** August 07, 2024, 07:16:16 pm »

Good morning.
Hello everyone. I have a problem with my Siglent 1072 CML+ oscilloscope.
The oscilloscope had not been used for two years. Today, after turning it on, it stopped at the Siglent logo. It does not respond to any buttons, the USB port for communication with the computer does not work. You cannot reset using the Math function.
The oscilloscope was used for approximately 100 hours.
Please help.
Sorry, I don't speak English and I use a translator.
Greetings from Poland.
Sławomir.

tautech · « **Reply #46 on:** August 07, 2024, 08:20:18 pm »

Quote from: slawekmod on August 07, 2024, 07:16:16 pm

Good morning.
Hello everyone. I have a problem with my Siglent 1072 CML+ oscilloscope.
The oscilloscope had not been used for two years. Today, after turning it on, it stopped at the Siglent logo. It does not respond to any buttons, the USB port for communication with the computer does not work. You cannot reset using the Math function.
The oscilloscope was used for approximately 100 hours.
Please help.
Sorry, I don't speak English and I use a translator.
Greetings from Poland.
Sławomir.

Welcome to the forum.

Check your messages.

slawekmod · « **Reply #47 on:** August 07, 2024, 08:43:18 pm »

Hello
Yes, I received the message.
I replied to the email.
Thank you very much for help.
Regards.
Sławek

slawekmod · « **Reply #48 on:** August 07, 2024, 08:58:53 pm »

Big thanks.
The oscilloscope works!
Thank you very much.
Regards.
Sławomir

Stestef89 · « **Reply #49 on:** August 09, 2024, 11:32:30 am »

Hi everyone, I have the same problem on my RSDS 1102CML+ oscilloscope, freezed on the boot logo RSPRO.
I tried with math button but nothing change...
Someone can help me please?

Thanks in advance

Oztralian · « **Reply #50 on:** September 13, 2024, 10:24:56 am »

I have the same problem as you guys have, got a SDS 1152CML+ stuck on boot screen.
Tried multiple times the math button reset but has not worked.
None of the buttons working - could someone help me with the usb reset?
Inserting memory stick into front usb socket gets a response but utility key press button not
working. Rear usb connection yields -
Siglent,SDS1152CML+,SDS1MHED4R5827,6.01.01.21R2\n
Correct make,model and serial number

tautech · « **Reply #51 on:** September 13, 2024, 10:35:37 am »

Quote from: Oztralian on September 13, 2024, 10:24:56 am

I have the same problem as you guys have, got a SDS 1152CML+ stuck on boot screen.
Tried multiple times the math button reset but has not worked.
None of the buttons working - could someone help me with the usb reset?
Inserting memory stick into front usb socket gets a response but utility key press button not
working. Rear usb connection yields -
Siglent,SDS1152CML+,SDS1MHED4R5827,6.01.01.21R2\n
Correct make,model and serial number

Welcome to the forum.

Check your messages.

Oztralian · « **Reply #52 on:** September 27, 2024, 12:55:15 am »

Thanks for the fix - the USB reset (& update) did the trick - cheers

PureSVMBC · « **Reply #53 on:** October 01, 2024, 08:39:12 am »

I have the same problem, got a SDS 1072CML+ stuck on boot screen.
Tried the math button reset but not worked, Could someone help me with USB reset/recovery package?

tautech · « **Reply #54 on:** October 01, 2024, 09:11:49 am »

Quote from: PureSVMBC on October 01, 2024, 08:39:12 am

I have the same problem, got a SDS 1072CML+ stuck on boot screen.
Tried the math button reset but not worked, Could someone help me with USB reset/recovery package?

Welcome to the forum.

Check your messages.

JHF · « **Reply #55 on:** October 10, 2024, 05:40:36 am »

Hi!

It seems my SIGLENT SDS 1052DL+ got the infamous "stuck on SIGLENT boot screen"

Would it be possible to receive the fabled recovery method ? It would save lives! (or 50$ and 2 weeks)

Thanks in advance!

J.H.

tautech · « **Reply #56 on:** October 10, 2024, 06:42:32 am »

Quote from: JHF on October 10, 2024, 05:40:36 am

Hi!

It seems my SIGLENT SDS 1052DL+ got the infamous "stuck on SIGLENT boot screen"

Would it be possible to receive the fabled recovery method ? It would save lives! (or 50$ and 2 weeks)

Thanks in advance!

J.H.

Welcome to the forum.

Just who exactly wants that sorta money for recovery ?
Name and shame please.

JHF · « **Reply #57 on:** October 10, 2024, 12:06:49 pm »

Haha, I don't remember the actual price of the recovery itself but the shipping cost of sending it back and forth was actually the major part of it

(I trash the quote so I can't tell the detail)

Thank you for the concern though!

tautech · « **Reply #58 on:** October 10, 2024, 06:48:18 pm »

Quote from: JHF on October 10, 2024, 12:06:49 pm

Haha, I don't remember the actual price of the recovery itself but the shipping cost of sending it back and forth was actually the major part of it (I trash the quote so I can't tell the detail)

Thank you for the concern though!

To whom exactly please ?

Recovery can be done by you, when given the correct recovery package !

Reach out to support-eu@siglent.com for the SDS1052DL+ recovery package.

JHF · « **Reply #59 on:** October 11, 2024, 07:36:03 am »

Hi!

Thank you for the answer and I'm gonna ask that support asap!

I'll have to ask my boss on monday where he got the quote because I can't remember (it would be either the supplier or some repair company I guess - this thing has been sitting in a corner for over 6 months since that ...) but the thing is : I work in a school and since it's not personal/company money but public fund no one really care (it's just me who found paying for what looks like a software glitch ridiculous).

PS : I did try spamming the "math" button to no avail then saw that forum ^^

Anyway, thanks again for the help and have a good day/night!

Strykker · « **Reply #60 on:** October 17, 2024, 01:44:38 am »

Hi All,

New to the forum as i was looking for some guidance on how / If I can address the same "Stuck on the Logo" start up screen on my new to me SDS1052DL+. This thread appears to be a hotbed of folks that have had similar issues. Tautech appears to have been the savior of many. Ive also tried, on numerous occasions, to apply the Math button reset with no luck. Could someone please point me to the solution that seems to be quite successful for so many. @Tautech can you help me out please.

Thanks,
Mike

tautech · « **Reply #61 on:** October 17, 2024, 08:07:24 am »

Quote from: Strykker on October 17, 2024, 01:44:38 am

Hi All,

New to the forum as i was looking for some guidance on how / If I can address the same "Stuck on the Logo" start up screen on my new to me SDS1052DL+. This thread appears to be a hotbed of folks that have had similar issues. Tautech appears to have been the savior of many. Ive also tried, on numerous occasions, to apply the Math button reset with no luck. Could someone please point me to the solution that seems to be quite successful for so many. @Tautech can you help me out please.

Thanks,
Mike

Welcome to the forum.

Check your messages.

commstech · « **Reply #62 on:** November 05, 2024, 01:36:18 am »

I have the same problem as others with my SDS1204X-E stuck on boot screen.
Tried multiple times the math button reset but has not worked.
None of the buttons working - could someone help me with the usb reset?
Siglent SDS1204X-E SDSMMFCQ5R8232

tautech · « **Reply #63 on:** November 05, 2024, 01:49:10 am »

Quote from: commstech on November 05, 2024, 01:36:18 am

I have the same problem as others with my SDS1204X-E stuck on boot screen.
Tried multiple times the math button reset but has not worked.
None of the buttons working - could someone help me with the usb reset?
Siglent SDS1204X-E SDSMMFCQ5R8232

Welcome to the forum.

Pop me a PM with your email address and we'll get you all fixed up.

JohnNemo06 · « **Reply #64 on:** November 25, 2024, 08:58:22 am »

Hello everyone,
I'am writing from France.
Same problem with this Siglent device (SDS 1052DL +).
Stuck at boot logo with "1", "Utility" and "Run/Stop" lit.
Have tried the "Math" button trick many times to no avail.
Have you a solution using usb method ?
Many thanks in advance.

Best regards

tautech · « **Reply #65 on:** November 25, 2024, 09:03:45 am »

Quote from: JohnNemo06 on November 25, 2024, 08:58:22 am

Hello everyone,
I'am writing from France.
Same problem with this Siglent device (SDS 1052DL +).
Stuck at boot logo with "1", "Utility" and "Run/Stop" lit.
Have tried the "Math" button trick many times to no avail.
Have you a solution using usb method ?
Many thanks in advance.

Best regards

Welcome to the forum.

Siglent EU HQ will help you:
info-eu@siglent.com

The USB recovery package they provide should also install the latest firmware; V6.02.01.13
Check that it does.

slowtrain · « **Reply #66 on:** March 24, 2025, 11:41:43 am »

Issue with oscilloscope RS PRO RSDS 1102CML+ ! it stays in the RS Logo.

Could I have the recovery package please?

Many thanks!

tautech · « **Reply #67 on:** March 25, 2025, 06:46:05 pm »

Quote from: slowtrain on March 24, 2025, 11:41:43 am

Issue with oscilloscope RS PRO RSDS 1102CML+ ! it stays in the RS Logo.

Could I have the recovery package please?

Many thanks!

RS is your first point of contact however Siglent HQ can help you:
support@siglent.com

slowtrain · « **Reply #68 on:** March 28, 2025, 08:04:43 am »

Many thanks tautech, but I've not received a reply from Siglent support.

tautech · « **Reply #69 on:** March 28, 2025, 08:35:27 am »

Quote from: slowtrain on March 28, 2025, 08:04:43 am

Many thanks tautech, but I've not received a reply from Siglent support.

Give them time.
It's Friday afternoon at HQ.

Tigozawr · « **Reply #70 on:** April 03, 2025, 06:14:34 am »

Same exact problem here with an SDS1052DL+. Turns the fans on, sometimes clicks the relays, but doesn't go past the splashscreen. I've tried pressing the Math button when booting and connecting the probes to the calibration pins. I've also tried inserting a USB stick with SDS1000DL+ Firmware - 6.02.01.07 into it. Formatted it into FAT32 with a 4GB partition and the rest 12GB free. Unfortunately, nothing. Can someone give me any pointers on what to do next?

tautech · « **Reply #71 on:** April 03, 2025, 06:33:26 am »

Quote from: Tigozawr on April 03, 2025, 06:14:34 am

Same exact problem here with an SDS1052DL+. Turns the fans on, sometimes clicks the relays, but doesn't go past the splashscreen. I've tried pressing the Math button when booting and connecting the probes to the calibration pins. I've also tried inserting a USB stick with SDS1000DL+ Firmware - 6.02.01.07 into it. Formatted it into FAT32 with a 4GB partition and the rest 12GB free. Unfortunately, nothing. Can someone give me any pointers on what to do next?

Welcome to the forum.

Siglent EU HQ will help you:
info-eu@siglent.com

The USB recovery package they provide should also install the latest firmware; V6.02.01.13
Check that it does.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: RS PRO / Siglent 1052DL+ stuck at boot logo. (Read 17703 times)

Share me