Products > Test Equipment

R&S SMU200A hard disk head crash

(1/2) > >>

and.pas:
Hi,
I have an SMU 200A which worked well until the hard disk experienced a head crash some days ago...  >:(
I extracted the disk, it's a standard SATA 2.5", so it can be easily replaced with a modern SSD.
The problems are:
- obtain a disk image
- enable licenses for installed options
- perform calibration if necessary

Any experience about this?

Thanks
Andrea


squadchannel:
I checked google (and xdevs), but no found recovery disk images..

However, there was firmware (applications) on xdevs.
https://mega.nz/folder/3HBzQTSJ#10gsXSHxpXYERrGD7w66wg

Let's install the winXP (Pro would be better) and applications and hope it works.

Apparently, if anyone has a working hdd, they can create a recovery disk from the boot manager. If you wait, you might find it.

pdenisowski:
I have the following

- 14057384T0100_ FMR9GP0101.iso (SMU Recovery Disk)
- RECOVERY_DVD_AIO_FMR679_SMx_0350.iso

Combined size is over 3 GB.  I have never tried these (and don't have an SMU to try them on) and I couldn't provide any support for this, but I'm happy to upload them somewhere if that would be helpful.

Might be worth contacting R&S support first - they might be able to provide a direct link or other docs for the recovery process.

magic:
What's the condition of the disk?

and.pas:
Thanks,
we could give a try to these restore disks!

The disk is completely inoperative, BIOS doesn't detect it at all, continuous clicking and metal friction noises.

Andrea

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod