EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: Frank_MV on October 10, 2021, 10:41:48 am

Title: RTB2000 course here in the forum that can help me get started?
Post by: Frank_MV on October 10, 2021, 10:41:48 am
Hello to all oscilloscope experts here on the forum,

I recently got an RTB2004, is there some sort of course here in the forum that can help me get started?
I am particularly interested in recording single operations with the "Single" button (as example spikes when turning a rotary switch) and recording I2C logs and displaying them from memory.

So far I have used my analog HAMEG HM 303

Thanks in advance,
greetings,
Frank

Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: Omicron on October 10, 2021, 11:36:18 am
R&S makes nice user manuals:

https://www.rohde-schwarz.com/cz/manual/r-s-rtb2000-user-manual-manuals-gb1_78701-402707.html (https://www.rohde-schwarz.com/cz/manual/r-s-rtb2000-user-manual-manuals-gb1_78701-402707.html)
Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: Frank_MV on October 10, 2021, 11:53:01 am
thanks, but of course I already have the user manual :-)
But unfortunately it does not contain any concrete measurement examples.
For someone who has years of experience with other digital oscilloscopes, it may be good as a reference book, but for beginners less ;-)
Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: Frank_MV on October 13, 2021, 09:45:17 am
Nobody here knows that ?
Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: tubularnut on October 13, 2021, 09:50:17 am
Check out the videos at R&S

Example below.

https://www.rohde-schwarz.com/uk/knowledge-center/videos/r-s-rtb2000-waveform-and-pattern-generator-video-detailpage_251220-505224.html (https://www.rohde-schwarz.com/uk/knowledge-center/videos/r-s-rtb2000-waveform-and-pattern-generator-video-detailpage_251220-505224.html)
Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: cmumford on October 15, 2021, 03:20:47 am
If you have the History option then I recommend viewing "Segmented / History mode on R&S RTB2004 vs. Keysight MSOX1000". IMO this is a must when capturing I2C dialogs between devices.

https://www.youtube.com/watch?v=O0xZXMHKlJY&ab_channel=mikeselectricstuff (https://www.youtube.com/watch?v=O0xZXMHKlJY&ab_channel=mikeselectricstuff)
Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: Rich@RohdeScopesUSA on October 15, 2021, 01:46:06 pm
Hi Frank_MV - we also have some short YouTube "how-to" videos on the RTB2000 here:

https://www.youtube.com/playlist?list=PLKxVoO5jUTlsHhyVcpVaZJ-a1x6mK9Fj9 (https://www.youtube.com/playlist?list=PLKxVoO5jUTlsHhyVcpVaZJ-a1x6mK9Fj9)

-Rich
Title: Re: RTB2000 course here in the forum that can help me get started?
Post by: Frank_MV on October 21, 2021, 05:10:01 pm
Thanks for all your tips.

Br,
Frank