« previous next »
Pages: [1]   Go Down

Author Topic: RTB2004 I2C Trigger  (Read 224 times)

0 Members and 1 Guest are viewing this topic.

Offline DarkoverTopic starter

  • Contributor
  • Posts: 29
  • Country: de
RTB2004 I2C Trigger
« on: March 20, 2024, 11:12:47 am »

I have an I2C on my RTB and like to trigger on the adress (0x50),
but it also triggers when there is 0x50 data on the bus.
Am I to stupid to find a solution or is the RTB crippled down compared
to the older and cheaper Hameg HMO scopes?

Olaf
Logged
 
The following users thanked this post: egonotto

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 26907
  • Country: nl
    • NCT Developments
Re: RTB2004 I2C Trigger
« Reply #1 on: March 20, 2024, 11:36:02 am »
Isn't there an option to trigger on an address specifically? Or I2C start condition + address?
Logged
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 
The following users thanked this post: egonotto

Online Kean

  • Supporter
  • ****
  • Posts: 2095
  • Country: au
  • Embedded systems & IT consultant
    • Kean Electronics
Re: RTB2004 I2C Trigger
« Reply #2 on: March 20, 2024, 11:45:36 am »
Select the Address and Data option under I2C Trigger, and leave the data values as don't care

https://www.rohde-schwarz.com/webhelp/RTB_HTML_UserManual_en/Content/de86ed8fb1bb44e5.htm#d803048e23212
Logged
 
The following users thanked this post: egonotto, pdenisowski
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee