Custom Firmware for RD6006 by UniSoft
https://www.eevblog.com/forum/testgear/ruideng-riden-rd6006-dc-power-supply/175/
https://monitor.net.ru/forum/threads/651114/page-4

Here is my BETA version, if anyone interested.
If you will find any bugs, please ASAP let me know.
You can always return to stock firmware at anytime.

In case of any problems while update,
keep pressed [ENTER] while power on device, to run device in BOOT mode.

RD60121_V1.31.x.bin - my custom firmware. (where x - is the build number (sub-version))
RD60121_V1.31.bin   - original (stock) firmware.

Still have some limits!
Cause I still didn't debug WIFI initialization, so temporary just disable that code. So WIFI will not work!
Maybe in future I will add it (if anyone will need it)...

If you want to return to stock firmware, recommend to set default setting
To do this: keep pressed button [0] while power on device.

---------
History:
---------

--- RD60121_V1.31.1.bin --- 

* Initial BETA version
* Optimized, get rid of HAL Libraries... switched to LL
+ The menu was complete remade.
+ [SHIFT] + [Left/Right]  switches the current layout (without save in settings)
  (if need to set layout after power on, then can do it over menu settings, same as before).
+ For 'layout 1', can be enabled/disabled items.
+ Added OPP (Over Power Protection).
+ [SHIFT] + [MEM]  used to setup OPP
+ OVP, OCP, OPP  now can be disabled by setting it to 0 (0 is equal to maximum)
+ When entering OVP, OCP, OPP, SHIFT button will be highlighted as well
  (to visually distinguish input: V-SET from OVP, I-SET from OCP).
+ The RIGHT button now works as a Backspace when typing.
+ When turned on the internal fan (the one that is on the module itself), icon will be displayed.
+ Added Setting for current cutoff in battery charger mode.
+ Added Setting for batt temp. cutoff in battery charger mode.
+ Added Battery Charger Layout 
+ Added Setting to skip keypad lock when connect with software.
+ [MEM] + [.]  now used to reset Wh, Ah
+ Option "Digits Style", can select style for large digits (32x64, 12x24, 7-Seg)
+ Decreased minimum battery voltage from 900mV to 300mV 
+ Option "SkipExitIVSet" (prevents exit from edit mode for V-SET and I-SET when press ON/OFF button).
+ Option "Power LED" (Setup the behavior of the power button LED in power off mode (Default-pulsating, 0%-off, etc...).
  (in modes 0% and 100% power consumption will be less (cause no need software generate PWM and can switch MCU in to the sleep mode)


---
BR
UniSoft
unis2@mail.ru




