Products > Test Equipment

SainSmart DDS120 & DDS140 USB Oscilloscope

<< < (76/84) > >>

bianchifan:

--- Quote from: doctormord on June 13, 2016, 09:27:50 am ---Check the code in openbuudai if the app is fixed to the older pid/vid combination.

--- End quote ---
Luckily the DDS140 type is fixed to "8312" in buudai_types.h, same as offered from mine :)

For I have no plan how to compile on Win7 I just even tried on Ubuntu 15.10.
Unfortunately compilation failes at last step:
g++ -m64 -Wl,-O1 -o bin/openhantek build/obj/colorbox.o build/obj/configdialog.o build/obj/configpages.o build/obj/dataanalyzer.o build/obj/dockwindows.o build/obj/dsocontrol.o build/obj/dsowidget.o build/obj/exporter.o build/obj/glgenerator.o build/obj/glscope.o build/obj/helper.o build/obj/levelslider.o build/obj/main.o build/obj/openhantek.o build/obj/settings.o build/obj/hantek_control.o build/obj/hantek_device.o build/obj/hantek_types.o build/obj/buudai_control.o build/obj/buudai_device.o build/obj/buudai_types.o build/obj/dso.o build/obj/moc_colorbox.o build/obj/moc_configdialog.o build/obj/moc_configpages.o build/obj/moc_dataanalyzer.o build/obj/moc_dockwindows.o build/obj/moc_dsocontrol.o build/obj/moc_dsowidget.o build/obj/moc_exporter.o build/obj/moc_glscope.o build/obj/moc_glgenerator.o build/obj/moc_levelslider.o build/obj/moc_openhantek.o build/obj/moc_settings.o build/obj/moc_hantek_control.o build/obj/moc_hantek_device.o build/obj/moc_buudai_control.o build/obj/moc_buudai_device.o build/obj/qrc_application.o build/obj/qrc_configdialog.o    -L/usr/lib/x86_64-linux-gnu -L/usr/X11R6/lib64 -LC:/Qt/lib/libusb/MS32/dll/ -llibusb-1.0 -LC:/Qt/lib/fftw-3.3.4-dll32/ -lfftw3-3 -lQtOpenGL -lQtGui -lQtCore -lGL -lpthread
/usr/bin/ld: cannot find -llibusb-1.0
/usr/bin/ld: cannot find -lfftw3-3
collect2: error: ld returned 1 exit status
Makefile.Release:193: recipe for target 'bin/openhantek' failed

to compare... same step at openhantek:
g++ -m64 -Wl,-O1 -o bin/openhantek build/obj/colorbox.o build/obj/configdialog.o build/obj/configpages.o build/obj/dataanalyzer.o build/obj/dockwindows.o build/obj/dso.o build/obj/dsocontrol.o build/obj/dsowidget.o build/obj/exporter.o build/obj/glgenerator.o build/obj/glscope.o build/obj/helper.o build/obj/levelslider.o build/obj/main.o build/obj/openhantek.o build/obj/settings.o build/obj/sispinbox.o build/obj/hardcontrol.o build/obj/control.o build/obj/device.o build/obj/types.o build/obj/moc_colorbox.o build/obj/moc_configdialog.o build/obj/moc_configpages.o build/obj/moc_dataanalyzer.o build/obj/moc_dockwindows.o build/obj/moc_dsocontrol.o build/obj/moc_dsowidget.o build/obj/moc_exporter.o build/obj/moc_glscope.o build/obj/moc_glgenerator.o build/obj/moc_levelslider.o build/obj/moc_openhantek.o build/obj/moc_settings.o build/obj/moc_sispinbox.o build/obj/moc_hardcontrol.o build/obj/moc_control.o build/obj/moc_device.o build/obj/qrc_application.o build/obj/qrc_configdialog.o    -L/usr/lib/x86_64-linux-gnu -L/usr/X11R6/lib64 -lfftw3 -lusb-1.0 -lQtOpenGL -lQtGui -lQtCore -lGL -lpthread

I have no skills in c++/g++ but when I change "-llibusb-1.0" to "-lusb-1.0" and "-lfftw3-3" to "-lfftw3" it compiles fine.
When started DDS140 is recognized but nothing further happens :(

mjwx4p:
i will try to dumb the firmware and will post it here. Again thanks for your help.

doctormord:
[dummyquote]I have no skills in c++/g++ but when I change "-llibusb-1.0" to "-lusb-1.0" and "-lfftw3-3" to "-lfftw3" it compiles fine.[/dummyquote]

That's normal and just fine. I should note that on the manual page. A proper make file should handle that, but I'm not into it. For compiling on Windows, there's a hint in the thread here.

mjwx4p:
Hi,
i had opened my device now, and here is a picture of it. If i compare the picture of doctormord and my picture, then there are several differences between our devices visible. It seems i have another hardware revision as doctormord.   :-[

I have some troubles to connect my device with ponyprog2000 or similiar. Maybe someone can help me with that. What i have to do?

Thanks for your help

mjwx4p:
Hi,
ok i can establish the connection now with Cypress Suite 3.4.7 if i install the cypress driver usb3 from cypress itself without jumper R32. But i can't establish the connection with ponyprog2000, even jumper R32 is plugged in or not. Which driver i have to use to work with ponyprog2000?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod