EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: tecophil on August 02, 2020, 10:17:49 am

Title: Schematic needed for Tektronix PS 2510 , also user manual if possible Thanks
Post by: tecophil on August 02, 2020, 10:17:49 am

I appreciate this product was made under different Names ... Information is available for the triple output variant, but to date nothing of the basic 0-35volt/ 0-3500mA model. thanks for any help.

Title: Re: Schematic needed for Tektronix PS 2510 , also user manual if possible Thanks
Post by: siggi on August 04, 2020, 07:41:21 pm

The PS 25XX supplies are quite modular in construction as I recall from repairing mine. I'd take a look at the schematics on TekWiki (http://w140.com/tekwiki/wiki/PS2520G), see whether they don't fit your PS quite well. I'd wager the display board and the HPIB boards are identical, the dual-channel PS board might simply have one channel populated or some such?