Products > Test Equipment
Hioki LCR 3532-50
<< < (3/6) > >>
KungFuJosh:

--- Quote from: Martin72 on December 24, 2023, 12:01:23 pm ---
--- Quote --- is it the lcr403e  software ?
--- End quote ---

Yes.
I have separated the values from a column and am looking to see how I can make a graph from them.

--- End quote ---

Create a new Sheet in Excel and name it what you want (I just do Chart).

Go to the new Sheet, and switch to the Insert tab. On the Insert tab, there's lots of options, I usually use a Scatter plot from the Charts box.


That will create an empty box. Right-click the empty box and click "Select Data..." From there you will select your data.

Here's one of mine:


Here's the data it's reading:
KungFuJosh:
This is kind of interesting. I've got the 3532-50 connected to my computer now. The "Hioki LCR Sample Program" is a little dated, but works and can send graphs to Excel, which is pretty cool. I did the attached sweep, then changed the chart type in Excel, and hid two of the values to reduce the clutter.
KungFuJosh:
It's a little odd that the app decides what order to put stuff in. 🤷
KungFuJosh:
When I do the short correction with the 3532-50, everything on the screen is zeroed out while shorted. This seems like a good thing, but it's the only meter I've seen that does this.

Is this normal or is it weird? Should my other meters do this too, or no?
shabaz:
I'm speculating unfortunately (I've only used a couple of LCR meters, not Hioki), but I think it's expecting the shorting link to be as-close-as zero ohms, and with almost zero inductance, so it will use that as your zero-ohm, zero-reactance calibration at that push-in socket. Since from the photo you're indeed using what looks like a decent short with such properties, then I think with that short calibration (along with the the 'open' calibration) then you're all set, i.e. I believe this would be normal.
 
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod