Products > Test Equipment
Scope recomendations in $15-20K range?
<< < (6/9) > >>
jayk:
Paul... does R&S offer similarly discounted MXO4s with lower specs (say 1GHz instead of 1.5GHz)?
jayk:
I've been comparing the SDS3104X HD and the 4104HD.  Screen on the Lecroy is slightly larger, sample rate a bit higher.  I see an optional spectrum analyzer upgrade for the Lecroy.  Much larger memory on the Siglent.  Apparently no web control interface on the Lecroy (just something called MAUI).  2x price difference.

I do some work with frequency synthesizers (think TI LMX or similar) and would like to look at the frequency settling time when the part is reconfigured.  I saw Shahriar do something like this in his Signal Path review of the Tek MSO6 series.  On the SDS3000X can I do a long capture and then look at the spectrum of a short portion as I sweep along the captured waveform? 
tautech:

--- Quote from: jayk on March 05, 2024, 07:42:36 pm ---I've been comparing the SDS3104X HD and the 4104HD.  Screen on the Lecroy is slightly larger, sample rate a bit higher.  I see an optional spectrum analyzer upgrade for the Lecroy.  Much larger memory on the Siglent.  Apparently no web control interface on the Lecroy (just something called MAUI).  2x price difference.

I do some work with frequency synthesizers (think TI LMX or similar) and would like to look at the frequency settling time when the part is reconfigured.  I saw Shahriar do something like this in his Signal Path review of the Tek MSO6 series.  On the SDS3000X can I do a long capture and then look at the spectrum of a short portion as I sweep along the captured waveform?

--- End quote ---
Calling @2N3055 to answer this in detail.
pdenisowski:

--- Quote from: jayk on March 05, 2024, 07:13:43 pm ---Paul... does R&S offer similarly discounted MXO4s with lower specs (say 1GHz instead of 1.5GHz)?

--- End quote ---

I don't think we have anything like that at this time, but I'll check with our North American oscilloscope product manager - I'm not personally involved with deciding what we include in bundles / promotions.
Performa01:

--- Quote from: jayk on March 05, 2024, 07:42:36 pm --- On the SDS3000X can I do a long capture and then look at the spectrum of a short portion as I sweep along the captured waveform? 

--- End quote ---
Yes, using the Analysis Gate function you can pick an arbitrary max. 4 Mpts long portion of the record for FFT analysis.

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod