Hello,
I just wanted to try it, but I can't get a connection from EasyWaveX to the SDG6000 and the SDS3000X HD.
The SDG6000 is connected via USB, the SDS3000X HD via LAN.
In TrueArb mode every point is scanned. At a maximum of 300 MHz, no more than 300,000,000 points can be scanned per second.
I also wanted to try whether 20 Mpts means 20 000 000 or 20 971 520, but first I need a connection to EasyWaveX.
Best regards
egonotto
PS: After I installed NI-Visa I get a connection again.
It is 20 971 520