Products > Test Equipment

SDM3045X to SDM3055X-E "Improvement" Thread

<< < (6/9) > >>

KungFuJosh:

--- Quote from: flo.b on November 01, 2023, 05:33:21 pm ---Oh yes, please make them release new FWs as soon as possible, to save us doomed people with the 5.02.01.09R2.

--- End quote ---

It wasn't a bug, it was a PEBKAC error. 🤷

tautech:

--- Quote from: flo.b on October 30, 2023, 11:28:31 pm ---Has anyone tried the Siglent SCD30A shunt after a successful conversion?
Is the "Option Measure" available in current measure mode?

The shunt manual states: "Suggest only working with SIGLENT SDM series 5 ½ or 6 ½ multimeters."
The SDM3055X-E is a 5 1/2 one.

My SDM3045X definitely doesn't have that option.

--- End quote ---
Nor does NIB SDM3055.  :-//
Will check SDM3065X soon.


--- Quote from: tautech on October 31, 2023, 11:47:45 pm ---Will try also on return to base. Have shunts in the SHS820X package.

--- End quote ---
So all I have is a 10A shunt that's std with the SHS800X range.

No SCD30A to test.  :(
https://int.siglent.com/u_file/download/23_05_17/SCD30A_DataSheet_EN01A.pdf
From pricelist description:
90 USD
Digital multimeter 30A current shunt-1mV/A, DC ~ 1 kHz ±0.3%, 1 kHz ~ 5 kHz ±5%, 30Vac RMS MAX, 60Vdc MAX (only compatible with SDM series multimeters which are 4 1/2 or above)

tautech:

--- Quote from: tautech on November 01, 2023, 08:53:07 pm ---
No SCD30A to test.  :(


--- End quote ---
HQ confirmed SCD30A the 30A external shunt is detected at boot and then Option Measure becomes available.
Hoping one will arrive in the next few weeks for checks and tests with all SDM models.  :popcorn:

KungFuJosh:

--- Quote from: tautech on November 02, 2023, 06:35:22 pm ---with all SDM models.  :popcorn:

--- End quote ---

You need to test on a SDM3055X-E also. 😉

glitchcatcher:
I found a bug in my SDM3045X meter.
Settings: DC current, 6mA range, Speed slow, Filter on.
To trigger the bug, either apply 2mA and slowly increase it slightly above 2.2mA, or just apply a current above 2.2mA but below 3.4mA.

This video shows it:
https://youtu.be/DAokqU_EXNc

Maybe They™ will release a new firmware so people with 5.02.01.09R2 can finally improve this box!

Report the bug!
https://siglentna.com/contact-us/
https://www.siglenteu.com/contact-us/

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod