| Products > Test Equipment |
| SDM3055 reading speed and storing |
| (1/2) > >> |
| chrisb741:
Hi, The SDM3055 has a reported reading speed of 150/sec When I set it to store data I only get about 60 recorded entries per second Is it possible to store the 150 readings per second? |
| Kean:
Did you select the Fast measurement mode? From the manual: --- Quote ---The instrument provides three types of measurement rate: 5 reading/s, 50 reading/s and 150 reading/s. 5 reading/s belongs to “Slow” rate; 50 reading/s belongs to “Middle” rate; 150 reading/s belongs to “Fast” rate. Measurement speed can be controlled by softkey menu. Press [Speed] and then press [Slow], [Middle] or [Fast] to choose measurement speed. --- End quote --- |
| chrisb741:
yep rate set to fast i get about 60 readings, slow is about 5 Could it be another option? I'll check again |
| Kean:
What measurement type? Some don't support Fast readings, and some only Slow. I don't have one of these, but I almost bought one so I have read the manual previously. |
| chrisb741:
I was measuring DCV Filtering is off |
| Navigation |
| Message Index |
| Next page |