Products > Test Equipment

SDM3055 reading speed and storing

(1/2) > >>

chrisb741:
Hi,

The SDM3055 has a reported reading speed of 150/sec
When I set it to store data I only get about 60 recorded entries per second
Is it possible to store the 150 readings per second?

Kean:
Did you select the Fast measurement mode?

From the manual:

--- Quote ---The instrument provides three types of measurement rate: 5 reading/s, 50 reading/s and 150 reading/s.
5 reading/s belongs to “Slow” rate; 50 reading/s belongs to “Middle” rate; 150 reading/s belongs to
“Fast” rate.
Measurement speed can be controlled by softkey menu. Press [Speed] and then press [Slow], [Middle]
or [Fast] to choose measurement speed.
--- End quote ---

chrisb741:
yep rate set to fast i get about 60 readings, slow is about 5
Could it be another option?
I'll check again

Kean:
What measurement type?  Some don't support Fast readings, and some only Slow.

I don't have one of these, but I almost bought one so I have read the manual previously.

chrisb741:
I was measuring DCV
Filtering is off

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod