EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: hakatu on November 22, 2023, 01:04:35 am

Title: SDS 1072 CML + won't boot up
Post by: hakatu on November 22, 2023, 01:04:35 am

Hi guys,

I have a Siglent SDS 1072 CML+ that was working normally until yesterday. It stucks at the Siglent/Siglent Technologies logo indefinitely. I tried the Math button for hard reset but it doesn't work.

This model has a USB B and RJ45 port at the back, is there anyway to recover the DSO base on those ports?

Thank you in advance.

Title: Re: SDS 1072 CML + won't boot up
Post by: tautech on November 22, 2023, 01:10:09 am

Quote from: hakatu on November 22, 2023, 01:04:35 am

Hi guys,

I have a Siglent SDS 1072 CML+ that was working normally until yesterday. It stucks at the Siglent/Siglent Technologies logo indefinitely. I tried the Math button for hard reset but it doesn't work.

This model has a USB B and RJ45 port at the back, is there anyway to recover the DSO base on those ports?

Welcome to the forum.

NO, under any circumstances, no !

Send PM with your email for our USB A recovery tools.

Title: Re: SDS 1072 CML + won't boot up
Post by: hakatu on November 22, 2023, 01:52:49 am

Quote from: tautech on November 22, 2023, 01:10:09 am

Quote from: hakatu on November 22, 2023, 01:04:35 am

Hi guys,

I have a Siglent SDS 1072 CML+ that was working normally until yesterday. It stucks at the Siglent/Siglent Technologies logo indefinitely. I tried the Math button for hard reset but it doesn't work.

This model has a USB B and RJ45 port at the back, is there anyway to recover the DSO base on those ports?

Welcome to the forum.

NO, under any circumstances, no !

Send PM with your email for our USB A recovery tools.

Thank you for the warning. I sent you the PM for the tools.

Title: Re: SDS 1072 CML + won't boot up
Post by: tautech on November 22, 2023, 01:58:52 am

Quote from: hakatu on November 22, 2023, 01:52:49 am

Quote from: tautech on November 22, 2023, 01:10:09 am

Quote from: hakatu on November 22, 2023, 01:04:35 am

Hi guys,

I have a Siglent SDS 1072 CML+ that was working normally until yesterday. It stucks at the Siglent/Siglent Technologies logo indefinitely. I tried the Math button for hard reset but it doesn't work.

This model has a USB B and RJ45 port at the back, is there anyway to recover the DSO base on those ports?

Welcome to the forum.

NO, under any circumstances, no !

Send PM with your email for our USB A recovery tools.

Thank you for the warning. I sent you the PM for the tools.

Replied via your email.

Title: Re: SDS 1072 CML + won't boot up
Post by: hakatu on November 22, 2023, 02:27:26 am

Thank you so much, it is now working normally

Title: Re: SDS 1072 CML + won't boot up
Post by: FIUNER on February 22, 2024, 07:39:32 pm

Hi, I'm having the same problem. I work at University and I have 2 Osciloscopes that freeze. Can you help me about this.
Tks!

Rodolfo

Title: Re: SDS 1072 CML + won't boot up
Post by: FIUNER on February 26, 2024, 08:10:24 pm

Thanks to Tautech! Now, Oscilloscopes are working normally!