| Products > Test Equipment |
| SDS 1202X-E Auto Power Up |
| (1/2) > >> |
| Miti:
Hi, We’re using an SDS 1202X-E in an automated test system and I wonder if there is a way to make it power up in full power after a power loss. It is inside a rack and it would simplify operator’s life if he didn’t have to push the power button. Cheers, Miti |
| coromonadalix:
https://www.amazon.com/Remote-Button-Pusher/s?k=Remote+Button+Pusher ?? for sure you need some solenoid trick or a mechanized trick https://www.amazon.com/Ne-fashion-Physical-Keyboard-clicking/dp/B09M8C5XZB/ref=sr_1_39?keywords=Remote+Button+Pusher&qid=1695401828&sr=8-39 |
| Miti:
I was thinking more like an option in one of the menus. Like a PC has options in the bios to recover from a power loss in the last state, standby or on. |
| tautech:
--- Quote from: Miti on September 22, 2023, 07:16:28 pm ---I was thinking more like an option in one of the menus. Like a PC has options in the bios to recover from a power loss in the last state, standby or on. --- End quote --- Unfortunately not for these 2ch X-E models, not even with the latest V1.3.27 firmware. :( However 4ch X-E do have this feature as do many other models from Siglent. I'll lodge a feature request. |
| Miti:
Thanks tautech, Another plus for Rigol, hard power button. |
| Navigation |
| Message Index |
| Next page |