Products > Test Equipment

SDS 1202X-E Auto Power Up

(1/2) > >>

Miti:
Hi,

We’re using an SDS 1202X-E in an automated test system and I wonder if there is a way to make it power up in full power after a power loss. It is inside a rack and it would simplify operator’s life if he didn’t have to push the power button.

Cheers,
Miti

coromonadalix:
https://www.amazon.com/Remote-Button-Pusher/s?k=Remote+Button+Pusher

??

for sure you need some solenoid trick or a mechanized trick

https://www.amazon.com/Ne-fashion-Physical-Keyboard-clicking/dp/B09M8C5XZB/ref=sr_1_39?keywords=Remote+Button+Pusher&qid=1695401828&sr=8-39


Miti:
I was thinking more like an option in one of the menus. Like a PC has options in the bios to recover from a power loss in the last state, standby or on.

tautech:

--- Quote from: Miti on September 22, 2023, 07:16:28 pm ---I was thinking more like an option in one of the menus. Like a PC has options in the bios to recover from a power loss in the last state, standby or on.

--- End quote ---
Unfortunately not for these 2ch X-E models, not even with the latest V1.3.27 firmware.  :(
However 4ch X-E do have this feature as do many other models from Siglent.

I'll lodge a feature request.

Miti:
Thanks tautech,

Another plus for Rigol, hard power button.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod