| Products > Test Equipment |
| SDS1104X-E, backup power supply |
| << < (5/5) |
| Linwood:
I just wanted to follow up. My thanks to @TomKatt for the EV solution. I also discovered I had a sine wave UPS but the EV was a lot easier. Well, mostly -- Kia has some weird ideas how that thing works, and how to turn it off (stopping requires hitting the door unlock -- not the charger door, the driver door unlock -- to stop using the adapter). Anyway... Anyway, just for a bit of closure.... First, I did not die, and neither did the scope. :phew: The generator has a surprisingly clean output as below. It's not perfect but decent. This is just one leg, I didn't want to chase down an extension cord to find the other leg. The green is neutral. The little blips are millivolts, I had looked more closely and forgot to expand them for the photo. This was under a mild load, a large burner on the stove on. Voltage is pretty accurate, frequency is a bit off (62.3) but did not change when I went from no-load to probably 1.5kw or so. Anyway, no real questions here, just a bit of closure and thank you. |
| Navigation |
| Message Index |
| Previous page |